Request For Demo     Request For FreeTrial     Subscribe     Pay Now

Underground Piping Works For Ows And Cbd Lines Underground Piping Works For Ows And Cbd Li...


Contract Award Notice

TRR 6583496
Organization Chennai Petroleum Corporation Limited
Tender No CPCL/PMC/T-005/2021-22
Funded By Self-Funded
Country India , Southern Asia
Contract Value 990,167

Work Detail

Underground Piping Works For Ows And Cbd Lines Underground Piping Works For Ows And Cbd Lines In Hgu-205 For Rlng Conversion Project At Manali Refinery Of Cpcl , Carbon Steel Piping Work , The Job Includes Transporation Of All Free Issue Materials From Owner''s Storage Point To Work Site , Handling At Site , Cutting , Bevelling , Fabrication , Laying , Welding & Erection Of Carbon Steel Piping Including Sleeve Pipes Below Ground Level , Trenches At All Depths , Stand Posts , Anchoring Of All Underground Pipelines For Conection With Equipments & Nozzles . , The Piping Job Includes All Modification And Replacement Jobs Involving Pipes & All Types Of Fittings Like Elbows / Tees / Reducers / Half Coupling / Full Coupling , Etc . , All Types Of Flanges Like Slip On / Raised Face , Etc . , Valves , Steam Traps , Orifice Assemblies , Strainers , Vents , Drains , Funnels , Etc . , Of Different Schedules , Pressure Ratings And For Various Temperature Applications , The Piping Job Includes Fabrication & Erection Of Pipe Sleeves , Providing Shoe Supports , Pads At Support Locations , Reinforcement Pads , Etc . , Wherever Required . , The Job Includes Flushing , Preparing Work Area For Executing Hot Work , Bending To Suit The Contours Wherever Required , Socket , Fillet , Butt Welding Using E 6010 / E 6013 / E 7018 Electrodes As Required , Dpt Wherever Required , , Hydraulic / Pneumatic Test Twice ( On Completion Of Fabrication & On Completion Of Laying At Site ) As Per Codes , Specification , Drawings And Draining Of Water & Drying With Compressor Air After Hydrotest . , The Job Also Includes Supplying Of All Types Of Tools & Tackles , Lifting Arrangements Like Chain Pulley Blocks , Machineries , All Consumables And Labour To Complete The Job In All Respects , Returning Back The Unused Materials To Owner''s Storage Point And Dumping The Generated Scrap Material To Designated Area As Per Eic Instructions . , Exclusions: The Rates For The Following Items Shall Be Exclusive Of Concrete / Pcc Breaking , Earth Work Removal , Blinding & Deblinding , Radiography , Stress Relieving , Reinforcement Pad Welding , Earth Back Filling , Removal Of Old Piping For Replacement . , Inclusions: The Rates For The Following Items Shall Be Inclusive Of Fabrication , Laying , Erection , Welding , Flushing Of The Piping System , Offering Stagewise Inspection , Hydrotesting And Draining / Drying Of The Piping System And Coating & Wrapping/Tape Coating , Guide Or Slide Supports Welding Between Main Pipe And Sleeve Pipe , Pads And Shoes Wherever Required . Contractor Shall Carryout Tape Coating As Per Specification 6-79-0011 And Offer For Inspection And Testing At Every Stage . , With Cpcl Supply Of Free Construction Power , Water & Contractor''s Welding Machine , Note: If Hydrotesting Is Avoided As Per Instructions Of Eic , 90% Of Unit Price Only Will Be Paid . , Butt Welding , Notes : , ( 1 ) Thickness Of Piping For Measurement Shall Be Based On The Relevant Ansi Or Equivalent Standards , ( 2 ) The Finished Weld Joint Elevation At Site Shall Be Taken As Reference For Measurement , Wherever Applicable . , ( 3 ) The Rates For Socket & Fillet Welding In Piping Shall Remain Same For All Thickness And Elevations As Per Sor . , ( 4 ) Rate For Weld Joints Of Vents & Drains Shall Be Paid On Actual Measurement Using The Applicable Sor . , ( 5 ) Fabrication & Welding Of Pipe Shoe Supports & Pad At Support Locations Are Included In Unit Price . , ( 6 ) For Blinding & Deblinding Wherever Involved , Rates Shall Be Paid Separately . , ( 7 ) For Stress Relieving Of Weld Joints , Rates Shall Be Paid Separately , ( 8 ) In Case Of Replacement Of Existing Piping , Rates For Removal Of Old Pipelines Shall Be Paid Separately , ( 9 ) During Hydrotesting Of The Above Piping Jobs , Some Portions Of The Existing Piping In The Circuit Required To Be Hydrotested Depending On The Blinding And The Same Shall Be Paid Separately . , ( 10 ) For Steam Tracing Piping Work , Hydraulic Testing Of Piping Is Required . For Bending Tracer Pipelines , The Rates Shall Be Paid Separately , ( 11 ) Hydraulic Testing Shall Be Done Only Once For Testing Underground And Sleeve Pipes Before Wrapping & Coating . . , ( 12 ) Radiography Of Weld Joints Is Not Included In Sor And Same Shall Be Paid Separately . , ( 13 ) Wrapping & Coating /Tape Coating Of Pipelines Is Included In Price Thru A Separate Sor Item . Refer Below . , Carbon Steel - Butt Welding Joint - Upto 8 . 8 Mm Piping Thickness - With Hydrotest , Blinding And De-Blinding , The Job Includes Collection & Transportation Of Required Quantity Of Materials Like Blinds , Gaskets , Fasteners , Etc . , From Owner''s Storage Point , Loosening & Tightening Of Studs ( Cold / Gas Cutting If Required ) , Wedge Opening , Cleaning Of Flanges , Insertions And Removal Of Blind & Gaskets , Providing New Gaskets After Removal Of Blinds , Overhauling Of Fasteners Using Oil , Replacing The Defective Studs / Nuts To Ensure Zero Leak Of Joints Including Hot Bolting . , The Job Also Includes Supplying Of All Types Of Tools & Tackles , Lifting Arrangements Like Chain Pulley Blocks , Machineries , All Consumables And Labour To Complete The Job In All Respects , Transportation Of Unused Materials To Owner''s Storage Point And Dumping The Generated Scrap Material To Designated Area As Per Eic Instructions . , Blinding And Deblinding For 150# & 300# Ratings: , Blinding & Deblinding - Size Upto 1 1/2 Inch Dia , Blinding & Deblinding - Size 2 Inch Dia . To 5 Inch Dia . , Tape Coating: Supply And Application Of Corrosion Protection Tape Caoting For Underground Steel Pipelines As Per Specification , Radiography , The Job Includes Performing Radiography Examination Of Welds On All Piping & All Type Of Equipments As Per Relevant Asme / Astm Standards & As Per Cpcl Specification Cpcl-Insp-Rad-01 At All Grades & Elevations With Film Width Not Less Than 4 Inches . , The Job Also Includes Supplying Of Radiation Source Camera , Other Machineries Required , All Consumables Required For Filming & Developing , Transportation Of Camera , Etc . , Area Preparation Before Starting The Job , Labour , Supervision To Complete The Job In All Respects Including Preparation Of Developing Chemicals , Developing The Films & Submission Of Films For Inspection Review . , Note: , ( 1 ) For Pipe Weld Joints , Nominal Diameter Of The Pipe Shall Be Taken For Measurement . . , Pipe Weld Joints - 2 Nominal Dia , Pipe Weld Joints - 4 Nominal Dia , Dye Penetration Test , Performance Of Dye Penetrant Test Including Supply Of All Necessary Materials , Equipment And Labour For Carrying Out The Work As Per Specification And Directions Of Engineer-In Charge . , Dye Penetration Test , Concrete Breaking/Road Cutting/Earth Excavation & Back Filling For Laying Or Removal Of Underground Piping/Dewatering . , Earth Work Excavation & Back Filling , The Job Involves Earth Work Excavation Below Ground Level Upto 2 Metres Depth & To A Required Width For Laying Underground Piping In All Types Of Soils Including Removal Of Vegetation , If Required , Dressing Of Sides , Levelling , Grading , Ramming Of Bottom , Back Filling On Completion Of Laying Of Pipes With Available Excavated Soil , Watering , Rolling , Ramming Of By Manual Methods / Mechanical Compactors , Dressing , Trimming , Etc . , The Job Also Includes Supplying Of All Types Of Tools & Tackles , Machineries , All Consumables And Labour To Complete The Job In All Respects As Per Eic Instructions . , Earth Work Excavation & Back Filling - Upto 2 . 0 Metres Depth , Shoring And Strutting , The Job Involves Provision And Installation Of Shoring And Strutting In Excavations Upto 2 Metres Depth , Dismantling And Removal After Completion Of Work As Per Instruction Of Engineer In

Key Dates

Contract Date 03 Feb 2022

Contact Information

Company Name
Awarded Bids List
S.No Bid Number Bidder Name Awarded Currency Awarded Value
1 30686 Sri Atchaya Engineering Private Limited INR 990166.82
Contract Value 990,167
Contract Date 03 Feb 2022

Complete details of the selected Tender
Organisation Name : Vijaya Bank
Organisation Type : Public Sector Banks Ministry : Ministry of Finance
Tender Ref. No : DIT/DELHIARMB/07052016/1
Tender Title : E-Auction Sale Notice for the properties of M/s Guru Kripa Iron Trading Pvt Ltd, mortgaged to Vijaya Bank and taken possession under the provisions of SARFAESI Act 2002.
Product Category : Land/Building
Sub Category :
Tender Value (INR if not mentioned):
Rs 1,62,00,000/-
EMD :
1620000
Document Cost :
0
Tender Type : Auction
Location : Delhi
First   
Announcement Date :
5-July-2016  
Publication Date on Portal: 5-July-2016 At : 8:03:09 PM  
Last Date of Document Collection :  
8-August-2016 Up To : 5:00 PM  
Last date for  
Submission :
8-August-2016 Up To : 5:00 PM  
Opening Date : 10-August-2016 At : 11:00 AM  
Work Description :
Pre-Qualification :
PreBid Meet Date : --
Tender Document : View Document *
Bid Document : Document Not available
Tech. Document : Document Not available
Sector : Banking, Finance & Insurance
State : Karnataka
 
For further Information Contact:
Name : Santhosh Aili
E-Mail : cbsprog11@vijayabank.co.in
Phone Office : 08025584066
Fax : 08025582747
Address :
City : Bangalore

  download Adobe® Reader®
Adobe® and Get Adobe® Reader® logo are trademarks or registered trademarks of Adobe Systems Inc. in the US and/or other countries.

View Notice Now...

Login with your Social Account for Instant Access to this notice


Tell us about your Product / Services,
We will Find Tenders for you