|
Construction Of Platform And Other Work Providing And Fixing Open Gym Equipments At Ward No 4 Vijayshree Nagar And Ward 10 Galobnagar ( Mla Fund ) Construction Of Platform And Other Work Providing And Fixing Open Gym Equipments At Ward No 4 Vijayshree Nagar And Ward 10 Galobnagar ( Mla Fund ) , Open Gym Items , Providing - Sky Walker • Dimensions: - 1650Mm ( Length ) X 700Mm ( Width ) X 1650Mm. ( Height ) • Safe Area: - 2.7Mtr X 1.6Mtr. • Sky Walker Equipment Made From “C” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Main Frame Pipe Is Of 80Mm Nb Pipe Which Is Bend At The Radius Of 250Mm. • The Leg Movement Frame Is Of 48 X 48Mm X 2.8Mm Thick M.S. Square Pipe. • Sleeves Are Made Up Of 98 Mm Od M.S. Pipe With Thickness 3Mm. This Results In Easy Replacement Of Bearings, Pins And Handle. • The Handle Frame Is Of 25Mm Nbpipe. • The Foundation Used For Fixing Is A Structre And Made From Center Pipe Of 80 Nb Pipe Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick.Main Pipe Supported With 23 Mm X 23Mm M.S. Angles Of 1.8Mm Thickness And 19Mm X 39Mm M.S. Square Pipes Of 1.8Mm Thickness. Two Foundations Are Provided For Rigid Support. • The Footrests Made From Hdpe / Lldpe Material Of Size 130 X 310 X 5Mm In Attractive Colors. • Closing Caps Are Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • The Pins Used Are Made Up Of Ø 25Mm Bright Material. Pins Are Fixed At The Outer End With M8 Grub Screws And Dia.7.8Mm Ball. • The Bearings Used Are “6205” Are Permanent Lubricated Sealed Bearing Of Reputed Brand. • High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. • Handle Grips Are Provided & It Is Made Up Of High Quality Rubber Material. • The Powder Coating Is Done With Pure Polyester Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. , Providing- Leg Press • Dimensions: - 1840Mm ( Length ) X 360Mm ( Width ) X 1560Mm. ( Height ) . • Safe Area:- 2.8 X 1.4Mtr. • Leg Press Equipment Made From“C” Class G.I. Pipe Of Different Nb. • Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Center Pipe Is Of 100Mm Nb Made From“C” Class G.I. Pipe. • The Sleeve Frame Is Of 100 Od And Of M.S. Seamless Pipe With Thickness 5Mm. This Sleeve Can Be Disassembled From Main Frame. • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thick. • The Remaining Outer Frame Is Of 32Nb Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “C” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 25 Mm X 25Mm M.S. Angle Of 3 Mm Thickness And 20Mm X 40Mm Crcsquare Pipe Of 3Mm Thickness. • Seat & Back Rest Provided Are Made Up Of Ms Deep Draw Quantity Of 2Mm Thickness With No Joint With Uniform Outer Edge Radius 20Mm. • The Footrests Are Made From Casted Aluminum Material, Having Sizes 130Mm X 310Mm X 5Mm Thick. With The Support Of 310Mm X 130Mm X 3Mm Thick Ms Plate. • The Frame Of Footrests Made Up Of 25 Nb “C” Class G.I. Pipe. • Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. • To Build Structure Bushes Are Used Which Are Made From M.S. Seamless Pipe Of 50Mm O.D. And 5Mm Thickness. • The Pins Used Are Made Up Of Ø25 Mm Sae 8620 Bright Material. • The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Brand. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Cerclips Used For Assembly Are Of A24 Mm. • The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Or Berger , Providing- Thi Chi Spinner 4 Wheel • Thi-Chi Spinner Equipment Made From “C” Class G.I. Pipe Of Different Nb. • Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. • The Center Pipe Is Of 100Nb Made Up Of “C” Class G.I. Pipe • The Bottom Welded With Support Of M.S. Round Plate Of Ø248 Mm & 9Mm Thickness. • The Handle Movement Frame Is Of 20Mm Nb & 25Mm Nb Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “C” Class Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X 23Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm M.S. Square Pipes Of 1.8Mm Thickness. • Base Cover Cap Is Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • Closing Caps Are Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • The Pins Used Are Made Up Of Ø 25 Mm Of Bright Material. • The Bearing Used Is “6001” & “6205” Permanent Lubricated Sealed Bearing Of Reputed Brand High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Cerclips Used For Assembly Is Of A 24 • The Nylon Bush Is Used For Handle Knob. • Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. • The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing - Chest Press • Dimensions: - 1800Mm ( Length ) X 650Mm ( Width ) X 2150Mm. ( Height ) . • Safe Area: - 3.0Mtr X 1.7Mtr. • Chest Press Equipment Made Up Of “C” Class G.I. Pipe Of Different Nb. • Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Bottom Welded With Support Of M.S. Round Plate Of Ø248 Mm & 9Mm Thickness. • The Connecting Pipes Are Made Up From 25Nb Pipe. • The Center Pipe Is Of 100Nb Pipe • The Handle Frame Is Made Up From 32Nb Pipe. • To Build Structure Bushes Are Used Which Are Made From Ms Seamless Pipe Of 60Mm O.D. And5mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of80 Nb Pipe, Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X • 23Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm Ms Square Pipes Of 1.8Mm Thickness. • The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size • 330 Mm X 300 Mmx1.8Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. • Closing Caps Are Made Up Of High Qualitydpe / Lldpe Material In Attractive Colors. • Base Cover Is Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • Pins Used Of Diameter 25Mm And 17Mm Are Made Up From Bright Material. • Bolt M8x16 Mm And Nylock Nut Of M8 Made Of Ss Material Is Used On Nylon Cap Mounted On Pins Toprotect Bearings And Pins From Rain And Dust. • The Bearings Used Are Of “6205” & “6203” Permanent Lubricated Sealed Bearing Of Reputed Brand • The Cerclips Used For Locking Is Made Up Of A24 Mm & A16mm. • High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. • Handle Grips Are Provided Which Are Made Of High Quality Rubber Material. • The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing -Air Walker • Dimensions :- 1000Mm ( Length ) X 350Mm ( Width ) X 1200Mm ( Height ) . •Safe Area: - 2.0 Meter X 1.8 Meter •Air Walker Equipment Made From “C” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bre Sizes I.E. Internal Diameter Of Pipe In Millimeters •The Main Frame Pipe Is Of 80Mm Nb Made From “C” Class G.I. Material Which Is Bend At The Radius Of 250Mm. •The Bottom Support Of M.S. Round Plate Of Ø248 Mm & 9Mm Thick. •The Leg Movement Frame Is Of 32Nb Made From “C” Class G.I. Pipe. This Link Is Supported With Ms Flat Of Size 58X7.8Mm. •The Handle Frame Is Of 25Nb Made From “C” Class G.I. Pipe. •The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “C” Class Welded With M.S. Round Plate Of Ø250 Mm & 10Mm Thick. Main Pipe Supported With 24 Mm X 24Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm Ms Square Pipes Of 1.8Mm Thickness. •Base Coveris Made From Hdpe / Lldep Material In Attractive Colors. •Closing Caps Are Made Up Of High Qualitydpe / Lldpe Material In Attractive Colors. •Pins Used Of Diameter 25Mm Are Made Up From Bright Material. A24 Circlips Are Used For Assembly. •The Bearings Used Are “6205” Permanent Lubricated Sealed Bearing Of Reputed Brand. •High Tensile Steel Galvanized Nuts & Bolts Are Used For Assembly. •The Footrests Are Made From Hpde / Lldpe Material, Having Sizes 130Mm X 310Mm X 5Mm Thick With The Support Of 250Mm X 115Mm X 2.8Mm Thick Ms Plate. •To Build Structure Bushes Are Used Which Are Made From M.S. Seamless Pipe Of 60Mm • O.D.And 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. •M8x16 Mm And Nylock Nut Of M8 Made Of Ss Material Are Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. •The Powder Coating Is Done By Pure Polyester Powder Of Ackzonoble Or Berger Paint With 60 To 70 Micron Thickness. , Providing- Triple Seating Twister• Dimensions: - 1150Mm ( Length ) X 1150Mm ( Width ) X 1300Mm ( Height ) . • Safe Area: - 2Mtr X 2Mtr. • Seated Twister Equipment Made From “C” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Center Pipe Is Of 100 Nb Pipe. • The Chair Support Pipe Is Of 25 Nb Pipe. • The M.S. Round Plate Of Ø248 Mm & 9Mm Thickness Is Welded At Bottom. • The Supporting Frame Of The Seated Twister Is Of 32 Nb Pipe. • The Handle Frame Of Seated Twister Is Of 25 Mm Nb Pipe. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of 80 Nb Pipe Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick. Main Pipe Supported With 23Mm X 23Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm M.S. Square Pipes Of 1.8Mm Thickness. • The Twister Plate Is Fitted On The Supporting Frame Is Made Up Of 50Nb Pipe And Ø 198Mm X 4Mm Thickness M.S. Round Plate. • Closing Caps Are Made Up Of High Qualitydpe / Lldpe Material In Attractive Colors. • The Pins Used Are Made Up Of Ø 35 Mm Bright Material. • The Bearings Used Are Of “6205” Permanent Lubricated Sealed Bearing Of Reputed Brand. • High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. • The Powder Coating Done With Pure Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing- Triple Standing Twiste • Dimensions: - 1250Mm ( Length ) X 1250Mm ( Width ) X 1200Mm. ( Height ) . • Safe Area: - Ø2.1 Mtr. • Triple Twister Made From “C” Class Galvanized Iron ( G.I. ) Pipe Ofdifferent Nb Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters. • The Center Pipe Is Of 100Nb Made From “C” Class G.I. Round Pipe. • The Bottom Support Welded Is Ofm.S. Round Plate Of Ø249 Mm & 9Mm Thick. • The Standing Frame Is Of 32Nb Made From “C” Class G.I. Pipe. • The Handle Frame Of Triple Twister Is Of 25 Mm Nb Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80Mm Nb “C” Class Welded With M.S. Round Plate Of Ø249 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X 23Mm M.S. Angle Of1.8Mm Thickness And 19Mm X 39Mm M.S. Square Pipe Of 1.8Mm Thickness • The Standing Plate Is Fitted On The Frame Made Up Of Ø 50 Nb Gi. Pipe. M.S. Round Plate Of Size Ø28mm X 9Mm Thickness. • Closing Caps Are Made Up Of High Qualitydpe / Lldpe Material In Attractive Colors. • The Pins Used Are Made Up Of Ø 35 Mm Bright Material. • The Bearings Used Are Of “6205” Permanent Lubricated Sealed Bearing Of Reputed Brand. • High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. • The Powder Coating Done With Pure Polyester Powders From Ackzonoble Orberger Paints With 60 To 70 Micron Thickness. , Providing - Cross Trainer [ Ellipticle ] • Dimensions: - 1320Mm ( Length ) X 600Mm ( Width ) X 1750Mm. ( Height ) . • Safe Area:- 1.77 X 1.2Mtr. • Cross Trainer Equipment Made From “C” Class G.I. Pipe Of Different Nb. • The Main Frame Pipes Are Of 80Nb “C” Lass G.I. Pipe With Single Bend Pipe With 250Mm Radius. • The Bottom Support Of M.S. Round Plate Of Ø248 Mm & 9Mm Thick. • The Handle Frame Is Made Up Of 25Nb “C” Class G.I.Pipe. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.I. Of 80 Nb “C” Class Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X 23Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm M.S. Square Pipes Of 1.8Mm Thickness. • To Build Structure Bushes Are Used Which Are Made From M.S. Seamless Pipe Of 60Mm Od. With 5 Mm Thickness. • The Footrests Are Made From Hdpe / Lldpe Material Of Size 130Mm X 310Mm X 5Mm Thickness And Mounted On M.S. Plate Of Size 10Mm X 245 Mm X 2.8Mm Thick. • Closing Caps Are Made Up Of High Quality Hdpe / Lldpe Material In Attractive Material. • Pins Used Of Diameter 35Mm, 25Mm, And 17Mm Are Made Up From Bright Material. • The Bearings Used Are Of “6007”, “6205” And“6203”Permanent Lubricated Sealed Bearing Ofreputed Brand. A16 , A 24 Mm Circles Are Used For Assembly. • Bolt M8x16 Mm And Unlock Nut Of M8 Made Of Ss 304 Used On Nylon Cap Mounted On Pins To Protect Bearings And Pins From Rain And Dust. • High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. • Handle Grips Are Provided & It Is Made Up Of High Quality Rubber Material. • The Powder Coating Is Done With Pure Polyester Powders Of Ackzonoble Or Berger • Paints With 60 To 70 Micron Thickness. , Providing- Shoulder Builder • Dimensions: - 850Mm ( Length ) X 600Mm ( Width ) X 1800Mm ( Height ) . • Safe Area:- 1.9Mtr X 1.9Mtr • Shoulder Builder Equipment Made From “C” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Center Pipe Is Of 100Mmnb Pipe, And The Bottom Support Of M.S. Round Plate Of 248 Mm Diameter & 9Mm Thickness. • The Handle Movement Frame Is Of Dia. 20Mm Nb & 25Mm Nb Pipe. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of80mm Nb Pipe Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X 23Mm M.S. Angle Of1.8 Mm Thickness And 19Mm X 39Mm M.S. Square Pipe Of 1.8 Mm Thickness. • Closing Caps Are Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • The Pins Used Are Made Up Of Ø 25 Mm Of Bright Material. • The Bearing Used Is “6001” & “6205” Permanent Lubricated Sealed Bearing Of Reputed Brand. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Cerclips Used For Assembly Is Of A 24. • The Nylon Bush Is Used For Handle Knob. • The Powder Coating Done With Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To70 Micron Thick. , Providing & Fixing - Sit Up Board Double • Product Dimensions: - 1950Mm ( Length ) X 1350Mm ( Width ) X 700Mm ( Height ) . • Safe Workout Area: - 2500Mm ( Length ) X 1600Mm ( Width ) . • The Sit Up Board Double Made From “C” Class Gi Pipe. Center Column Made From 100Mm • Nb “C” Class G.I. Pipe. • Sleeve Provided Of M.S. Seamless Pipe Of Outer Diameter 123Mm With Thickness 3Mm Provided. • The Main Frame Is Of 50Mm Nb Pipe. Frp Sheet Of 3Mm Thickness Is Molded On Main Frame. • The Remaining Frame Of The Sit Up Board Is Of 32Mm Nb Pipe. • Closing Caps Are Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • Fiber Reinforced Plastic Sheet Of 3Mm Thickness Is Bounded On 25Mm Nb Pipe Of Main Frame. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of 80 Nb Pipe Welded With M.S. Round Plate Of Ø249 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X 23Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm M.S. Square Pipes Of 1.8 Mm Thickness. • The Powder Coating Is Done With Pure Polyester Powder Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. , Providing - Seated Puller• Dimensions: - 2000Mm ( Length ) X 670Mm ( Width ) X 1850Mm. ( Height ) . • Safe Area:- 1.2Mtr X 3Mtr • Seated Puller Equipment Made Up Of “C” Class G.I. Pipe Of Different Nb. • Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Center Pipe Is Of 100Nb Pipe. • Bottom Support Is Of M.S. Round Plate Of Ø 248 Mm & 9Mm Thickness Is Welded. • All Linkages Are Made Up Of 25Nb Pipe. • The Handle Frame Is Of 32Nb Pipe. • The Seat Frame Is Of 32Nb Pipe. • To Build Structure Bushes Are Used Which Are Made From Seamless Pipe Of 60Mm O.D. And • 5Mm Thickness As Well As 60Mm Diameter Solid Bar Bush Is Used. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of 80 Nb Pipe Welded With M.S. Round Plate Of Ø248 Mm & 9Mm Thick.Main Pipe Supported With 23 Mm X 23Mm M.S. Angles Of 1.8 Mm Thickness And 19Mm X 39Mm M.S. Square Pipes Of 1.8Mm Thickness.• Base Cover Cap Is Made From High Quality Hdpe / Lldpe Material In Attractive Colors. • The Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.S. Sheet Of Size 330 Mm X 300 Mmx1.8Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. • Closing Caps Are Made Up Of High Quality Hdpe / Lldpe Material In Attractive Colors. • Pins Used Of Diameter 25Mm And 17Mm Are Made Up From Bright Material. • The Bearings Used Are Of“ 6205” And “6203” Permanent Lubricated Sealed Bearing Of Reputed Brand.• High Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. • The P.U. Bushes ( Stopper ) Used To Avoid The Collision. • The Cerclips Used For Assembly Are Of A16. • Handle Grips Are Provided Which Are Made Of High Quality Rubber Material. • The Powder Coating Is Done With Pure Polyester Powder Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. , Providing - Uneven Bar • Dimensions: - 3200Mm ( Length ) X 500Mm ( Width ) X 2200Mm. ( Height ) . • Safe Area: - 5.4Mtr X 5.2Mtr. • Uneven Bar Equipment Made From “C” Class G.I. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimeters • The Main Frame Of 80 Nb Pipe. • The Bottom Support Of M.S. Round Plate Of Ø249 Mm & 9Mm Thickness Is Welded At Bottom. • The Handle Frame Is Of 25Mm Nb & 32Mm Nb Pipes. • The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of 80 Nb Pipe, Welded With M.S. Round Plate Of Ø249 Mm & 9Mm Thick. Main Pipe Supported With 23 Mm X 23Mm M.S. Angles Of 1.8Mm Thickness And 19Mm X 39Mm Ms Square Pipes Of 1.8Mm Thickness. • Closing Caps Are Made Up Of High Qualitydpe / Lldpe Material In Attractive Colors. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70Micron Thickness. , Providingms Bench And Frp Material Size 1.2 M X 0.45 M Height 0.60 M Capacity 3 Person, Main Frame 20 Mm Nb Pipe In Gi & Seat & Back Rest Made Up From 20 Mm X 40 Mm Rect. Of Frp Material For Seating Comfort....Etc. Complete. , Cycle , Name Board , Excavation, Concreting, Fitting, Etc.Job Work For All Items , Testing Charges
|
