|
Providing And Fixing Of Benches, Play And Open Gym Equipment I Various Parks In Sector 6, Ward No 2, Panchkula. - 10.F.2 Hsritem 10.77-Pre-Cast Cement Concrete 1:2:4 With Stone Aggregate 20 Mm Nominal Size In Kerbs And The Like Items, Finished Smooth With 6 Mm Thick Cement Plaster 1:3 On Exposed Surface Including Form Work, Placing And Fixing In Position, Complete At The Ground Level Or In First Storey. Cum Through Rate 12.57 5, 183.75 65, 159.73 Nsitem Nsitem -Pull Chair: Providing, Designing And Fixing Of Pull Pair Of Size 2500 X 800 X 2000 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc Each Nsadrate 3.00 27, 100.00 81, 300.00 Nsitem Nsitem -Arm Wheel:- Providing, Designing And Fixing Arm Wheel In A Pair Of Size 850 X 800 X 1800 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Each Nsadrate 1.00 27, 100.00 27, 100.00 Rubber. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc 10.N.17 Hsritem 10.158-Providing & Laying 60 Mm Thick Isi Marked Interlocking Paver Blocks ( Conforming To Is 15658 2006 ) Of All Shapes & Colours Of Design Mix Cement M-35 Over A Bed Of 25Mm Thick Fine Sand Complete In All Respect Sqm. Through Rate 513.75 429.00 220, 398.75 Nsitem Nsitem -Horse Rider Station: Providing, Designing And Fixing Of Horse Rider Station Of Size 1000 X 600 X 1100 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Padals Shall Be Made Up Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-Incharge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc Each Nsadrate 2.00 27, 100.00 54, 200.00 Nsitem Nsitem -Providing And Fixing Of Cast Iron Bench Made Up Of 13 M.S. Rectangular Hollow Pipes ( 50Mm X 25Mm X 5Mm ) In Length Of 1500Mm With Decorative Cast Iron Stand / Leg And Handles, In Any Colour And Design, Complete In All Respect Upto The Satisfaction Of Engineer-In-Charge. ( Hanging Total Weight Of Bench = 90 To 92 Kg ) Each Nsadrate 33.00 6, 650.00 219, 450.00 Nsitem Nsitem -Exercising Bar:- Providing, Designing And Fixing Exercising Bar Of Pull Pair Of Size 1800 X 550 X 1700 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Base Plate Cover To Be Made Up From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc Each Nsadrate 1.00 27, 100.00 27, 100.00 Nsitem Nsitem -Providing And Fixing Of Slide Complete In All Respects Each Nsadrate 1.00 35, 000.00 35, 000.00 Nsitem Nsitem -Providing And Fixing Of Swing Complete In All Respects Each Nsadrate 1.00 27, 000.00 27, 000.00 Nsitem Nsitem -Stair Stepper: Providing, Designing And Fixing Of Stair Stepper In A Combination Of Pair And A Single Step Of Size 1000 X 800 X 1400 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Each Nsadrate 2.00 27, 100.00 54, 200.00 Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-Incharge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc 10.D.3 Hsritem 10.28.-Cement Concrete 1 : 8 : 16 With Stone Aggregate 40 Mm Nominal Sie In Foundation And Plinth. Cum Through Rate 19.87 1, 752.57 34, 823.66 Nsitem Nsitem -Air Swing: Providing, Designing And Fixing Of Airs Winging Pair Of Size 1150 X900 X1250 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Seat And Base Plate Cover Shall Be Made Up Of Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintained Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc Each Nsadrate 3.00 27, 100.00 81, 300.00 Nsitem Nsitem -Leg Press: Providing, Designing And Fixing Of Stair Stepper In A Combination Of Pair And A Single Step Of Size 2000 X 550 X 1600 Mm Fabricated With Main Post Of 140Mm Dia And 3.00 Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Each Nsadrate 3.00 27, 100.00 81, 300.00 Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Gi / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc Nsitem Nsitem -Providing And Fixing Of See Saw Complete In All Respects
|
