|
Tender For Certain Repair To Sanitary Fittings, Tiles And Other B/R Item In Otm Accn In Aor Of Age B/R-Iii Under Ge 864 Ews(Job No:Tpp 2024-25); 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etccomplete all as specified and directed. 2 M&L for white Glazed ceramic tiles on vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. 3 Demolition of cementconcrete un-reinforceed in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed. 4 Demolition of cement concrete un-reinforced any description in any position complete all as specified and directed. 5 M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) light shade, polished, area of each tiles exceeding 0.36sqmbut not exceeding 0.42sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4,complete all specified and directed. 6 M&L for white Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:4,complete all specified and directed. 7 M&L for vitrified ceramic tiles light shade 10mmthick (square/Rectangular) polished, area of each tile n exc 0.36 Sqm in vertical surfaces such as walls, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match,fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. 8 M&L for Chequered cement concrete tiles 30cmx30cmx22-25mm thick, with whitecement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified & directed. 9 M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcomplete all as specified and dirceted. 10 M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of flooring/ hard standing complete all as specified and directed. 11 M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. 12 M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in sub base / levelling course finished even and rough to receive floor finishes complete all as specified and directed. 13 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 14 S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 15 M&L for two coats of synthetic enamel paint on steel Surfaces of anydescri-ption, over 10cm in width or girth , not other wise described,over one coat of priming with red oxide or zinc chromate on steel surface including preparation of new surface complete all as specified and directed. 16 M&L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. 17 Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards/slabs/bankets, any thickness, including cover plate complete all as specified and directed. 18 M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid over and including Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605x605mm all as specified and directed. 19 S&FHollowPVC Wall Lining consisting of 5mm thick Plain colour PVC sheet 5mm thick PVC sheet fillet of width 20mm L & U for wall paneling inclusive of fixing on to wall to make PVC Frameas per specifications and drawingcomplete all as specified and directed. 20 M&L for wrought Second class soft-wood in scantlings including dismantling of old unservicsable timber scantling 40sqcm and over in section complete all as specified and directed. 21 S&F 6mm thick plywood grade BWR type BB fixed with screws/ nails to timber frame work for wall panelling and wall/ ceiling complete all as specified and directed. 22 S&F 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 13 Sqcm and n exc 25 Sqcm complete all as specified and directed. 23 Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. 24 Taking down frame with shutters (without taking off shutters from frame)n.exc 1.5 sq.m each complete all as specified and directed. 25 Taking down shutters n.exc 1.0 sqm eachcomplete all as specified and directed. 26 Taking down shutters exc 1 sqm and n.exc 2 sqm eachall as specified and directed. 27 S&F for 2nd class hard-woodPlain, solid, straight chowkats and frames, wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. 28 S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24(a) complete all as specified and directed. 29 M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter any number of panel with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed. 30 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. 31 S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. 32 S&F 150 mm extruded aluminium alloy handles, fabricated type complete all as specified and directed. 33 S&F 100 mm extruded aluminium alloy handles, fabricated type complete all as specified and directed. 34 S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed. 35 S&F Aluminium anodized, barrel tower bolt 150mm long of extruded section, complete all as specified and directed. 36 S&F mild steel butt hinges medium weight 100 mm size etc complete all as specified and directed. 37 S&F 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed. 38 S&F 300mm mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. 39 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 40 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing. 41 M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 42 S&F in repair Harrison rails, mild steel, chromium plated with brakcet, knobs, rings @ 10cm c/c etccomplete all as specified and directed. 43 Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed. 44 M&L for 18-20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified & directed. 45 M&L for Machine cut kota stone slab flooring 18- 22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completefixed over and including15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. 46 M&L for machine cut kota stone slab18- 22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing completefixed over and including10 mm thick bedding layer in CM 1:4 complete all as specified and directed. 47 Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed. 48 S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed. 49 S&F 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etccomplete all as specified. 50 S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 51 S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofovering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 52 Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 53 M&L for15mm thick rendering plaster in CM 1:6 on fair faces of brick or concrete surfaces finished to even &smooth without using extra cement complete all as specified and directed. 54 M&L for15mm thick rendering plaster in CM 1:4 on fair faces of brick or concrete surfaces finished to even &smooth without using extra cement complete all as specified anddirected. 55 M&L for5mm thick rendering plaster in CM 1:4 on ceiling surfaces finished to even and fair complete all as specified and directed. 56 M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. 57 M&L for preparation of new surfaceof walls and applying two coats oil bound distemper over coat of suitable primer, complete all as specified and directed. 58 M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as specified and directed. 59 M&L for preparation of oldplastered surface of wall and applying two coats of cement base paint complete all as specified and directed. 60 S&F in repair 3-layer PP-R polypropylene random copolymer)25mm outer Dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all fittingsPP-R plain &brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. 61 S&F in repair 3-layer PP-R polypropylene random copolymer) 32 mm outer Dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all fittingsPP-R plain &brass threaded polypropylene random fittingsfixed complete to walls, ceilings or in floors etc. complete all as specified and directed. 62 S&F in repairs PP-R Gate valves (brass insert)25mm outer Diaas per requirement of the site complete all as specified and directed. 63 S&F in repairs PP-R Gate valves (brass insert)32mm outer Diaas per requirement of the site complete all as specified and directed. 64 S & F,In Repair 15 mm bore Brass CPWall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe complete all as specified and directed 65 Dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity complete all as specified and directed. 66 Dismantling PVC water tanks exc 500 litres and not exc 1000 litres capacity complete all as specified and directed. 67 S&F rotational molded polythylenewater storage tank 500 ltr capacity, three layer (Cylinderical vertical with closed top) hoisted and fixed in positioncomplete all as specified and directed. 68 S&F rotational molded polythylenewater storage tank 1000 ltr capacity, three layer (Cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed. 69 S&F in repair 20mm bore ball PTMT valve, high pressure with polythene float and fly nut completescrewed for iron pipe or brass ferrule complete all as specified and directed. 70 S&F in repair stop valve, cast copper alloy with crutch or butterfly handles, screwed both ends for 20mm bore iron pipe or bras ferrule complete all as specified and directed. 71 S & Fin repair 15mm diaBib taps,chromium plated fancy type,screwed down, screwed for iron pipe or for brass ferrule complete all as spd & directed 72 S&F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets and 15 mm boreCP centre hole mixer complete all as specfied and directed. 73 S&F in repair vitreous china squatting pan Orissa pattern long pan size 580 x440 mm white withintegral foot rests (excluding cistern and flush pipe),complete all as specified and directed. 74 S&Fin repairs vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern complete all as specfied and directed. 75 S&F in repair PVC low level flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket complete all as specfied and directed. 76 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specfied and directed. 77 S&F in repair Angle valve / Stop valve 15mm dia cast copper alloy chromium plated fancy type without shank and cup concealedtype srewed for iron pipe or for union complete all as specfied and directed. 78 S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60 cm long between flanges complete all as specfied and directed. 79 S&F in repair brass chromium plated shower rose 125mm size with arms fitted to steel pipe or unioncomplete all as specfied and directed. 80 S&F in repair CP brass soap dish, heavy duty, fixed with chromium plated brass screwscomplete all as specfied and directed. 81 S&F in repair Corner/Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 82 S&F in repair toilet paper holder of chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. 83 S&F in repair 15 mm bore Brass CPWall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. 84 S&F in repair CP Towel Ring 200mm dia complete all as specfied and directed. 85 S&F in repair CP steel grating 75/100mm dia, complete all as specified and directed. 86 S&F in repair door closer hydraulically regulated (Aluminium extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 87 S&F in repair floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. 88 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. 89 Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refining or removal from site complete all as specfied and directed. 90 Taking up or down 20mm bore dia, steel tubing & connections incl cleaning for refining or removal from site complete all as specfied and directed. 91 S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or laid in floor complete all as specfied and directed. 92 Refixing 15 mm bore old steel tubing and connections in new or old position of walls, ceiling, floors, etc with new fittings complete all as specfied and directed. 93 S&F steel water tubing galvanised 20mm bore, medium grade fixed to walls and ceiling or laid in floor complete all as specfied and directed. 94 Refixing 20mm bore old steel tubing and connections in new or old position of walls, ceiling, floors, etc with new fittings complete all as specfied and directed. 95 S&F in repairs Vitreous china white urinal flat back size 465x355x265 mm with grating and union for discharge pipe 32mm waste coupling and waste pipe including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed. 96 M&L for special treatment to sunken portions of Toilet by demolition of existing treatment of any description and thickness, removal rubbish outside MD land,10mm thick plaster in cement mortar (1:4) with water proofing liquid conplast 421 of make Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of M/S Fosroc or equivalent as specified on plastered surface and rendering again 10mm plaster in cement mortar (1:4) mixed with conplast 421 of M/S Fosroc or equivalent as specified in Sunken portion and CI pipe joints shall be filled/jointed with mixture of cement, fine, sand and Nittoproof 130 of M/S Fosroc or equivalent as specified and provide hole in the wall and fix 600mm long and 20mm dia GI spouts light grade and PCC (1:5:10)E-2 (using 40mm graded crushed stone aggregate) /brick bats filling in sunken portions, complete all as specified and directed. 97 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,complete all as specified and directed. 98 S&F 110mm dia PVC (SWR) pipes including ecessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 99 S&F 75mm dia PVC (SWR) pipes including ecessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 100 S&FPVC (SWR) bends 110 mm bore with access door etc complete all as specified and directed. 101 S&FPVC (SWR) bends 75 mm bore with access door etc complete all as specified and directed. 102 S&F PVC (SWR) junction single,110 mm (Single T) equal or unequal etc complete all as specified and directed. 103 S&F PVC (SWR) junction single,75 mm (Single T) equal or unequal etc complete all as specified and directed. 104 S&F PVC (SWR) junction single,110 mm (double T) equal or unequal etc complete all as specified and directed. 105 S&F PVC (SWR) couplers ,110 mm etc complete all as specified and directed. 106 S&F PVC (SWR) couplers ,75 mm etc complete all as specified and directed. 107 S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed. 108 S&F PVC (SWR) vent cowl 75 mm complete all as specified and directed. 109 S&F in repair PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement of 75/110 mm dia etc complete all as specified and directed. 110 S&F in repairPVC (SWR) P’ trap110 mm complete all as specified and directed. 111 M&L for PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregates)as in plinth protection, haunching of pipe, flooring etc complete all as specified and directed. 112 S & f, in repair PVC connections 15mm size with PTMT nuts of length 600mmcomplete all as specified and directed. 113 S&F in repair 600mm X 450mm bevelled edge mirror of selected quality mounted on plastic frame covered back with commercial and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specfied and directed. 114 S&F Endura floor tiles size 30cm x 30cm x 10mm thick set jointed and pointed in neat cement slurry with pigment in floors over and including 15mm thick screed bed in C.M. 1:6 complete all as specified and directed. 115 M&L for water proofing treatment in following stages:-(i)Taking down plaster and rendering plaster in CM 1:3 with water proofing liquid as per manufacturers instruction over concrete surface finished even and smooth without using extra cement.(ii)First coat of bitumen primer confirming to IS-3384@ 0.40 Kg/Sqm over plastered surface.(Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd).(iii) Second layer of APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.6 Kg/Sqm with a centre core of 90 micron high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix, the polymeric asphaltic mix will be protected on both sides with thermo fusable HMHDPE filmof make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufacturedby M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish.torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends complete all as directed. 116 M&L for PCC padding in cement concrete type B0 (1:2:4) (12.5 mm graded aggregate) to achieve required slope before water proofing treatment complete all as specified and directed.
|
