Tender For Replacement Of Damage 33 Kv Vcb And Control Panel in India

Work Detail

Tender For Replacement Of Damage 33 Kv Vcb And Control Panel- 1 Replacement of 3NOS 11KV VCB STELMAC S/S Dhoom Manikpur 2 Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 3 TO 15 3 11KV O/G VCB (STELMAC) 4 11KV XLPE CABLE 3X185SQMM 5 11KV I/D TERMINATION KIT FOR XLPE CABLE 3X185SQMM 6 11KV O/D TERMINATION KIT FOR XLPE CABLE3X185 SQMM 7 ST POLE 11MTR LONG 8 STONE PAD 9 TOP CHANNEL 10 DROPPER CHANNEL 11 11KV TPMO 12 11KV FUSE SET 13 EARTHING COMPLETE 14 24V CHARGER WITH BATTERY 15 CONTROL CABLE 4X2.5SQMM 16 Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO. 17 INSTALLATION AND COMMISSIONING OF 11KVO/G VCB WITH MAKING OF FOUNDATION & PLINTH AND COMPLETE WORK IN ALL RESEPCT. 18 FIXING AND CONNECTING OF LT 4CORE 2X2.5SQMM CONTROL CABLE AT VCB. 19 FIXING OF PIN INSULATOR WITH PIN, COMPLETE WORK IN ALL RESPECT. 20 Laying and commissiong of 11KV 3x185sqmm XLPE CableDouble Ckt. after digging trenchof dia 220 mm in two parallel bores for Double Curcuit by manual method at a depth of 1.50 mtrs to 2.50 mtrs. (as requirement at site) below the ground levelfor laying cable and refilling of trench including connections at both ends after providing and crimping of lugs of proper size for completion of work and Providing & Laying of Ist Class Bricks, along the length on both side of 11KV XLPE Cable in Cable Trench (minium 18No. Bricks/Mtr per Cable) and Stone Slab of size 450x600x50mm on top of the each Cable, Providing 150 thickness mm River sand for cushion beneath and 150mm above the cable and Back filling of excavated earth in the cable trench upto the ground level and ramming properly with looping and riser. 21 Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable outdoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect. 22 Preparation and Fixing of 11 KV Power Cable ends:Making and Fixing of 11 KV XLPE Heat shrinkable indoor jointing kits suitable for 3x185sqmm XLPE Cable after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs with complete connention in all respect. 23 The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, E bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule.Double Pole Structures(a)ST POLE 11MTR 24 Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming.Single Pole and Double Pole(a)ST POLE 11 MTR AND PCC POLE 8.5MTR 25 FIXING OF STONE PAD AS PER SITE REQUIREMENT. 26 FIXING OF TOP CHANNEL AS PER SITE REQUIREMENT. 27 FIXING OF DROPPER CHANNEL AS PER SITE REQUIREMENT. 28 INSTALLATION AND FIXING OF TPMO WITH MAKING OF FOUNDATION AND PLINTH WITH PROPER CONNECTION IN ALL RESPECT. 29 FIXING OF FUSE SET AS PER SITE REQUIREMENT. 30 Driving of MSearth rod of size20x2500 mm in earth andjointing through G.I. wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing. Supply Erection, fixing, grouting of stay rod in cement, sand and brick ballastin ration 1:4:8 in Block 600*600*300 mm with binding & nuzzlingincluding providing & fixing of stay insulator complete in all respect with grouting. (All Work and Material in the scope of Contractor) 31 INSTALLATION AND FIXING OF CHARGER WITH BATTERY AT SUBSTATION WITH PROVIDING CABINET WITH PROPER CONNECTION IN ALL RESPECT. 32 FIXING OF CONTROL CABLE 4X2.5SQMM AS PER SITE REQUIREMTN. 33 PROVIDING AND FIXING OF BEST QUALITY GI PIPE 6DIA AS PER SITE REQUIREMENT. 34 PROVIDING AND FIXING OF HOLDING CLAMP AS PER SITE REQUIREMENT. 35 PROVIDING AND FIXING OF NUT BOLT AND WASHER AS PER SITE REQUIREMENT 36 REMOVAL AND DISMENTALING OF OLD & DAMAGED 03 NO. 11KV VCBFROM THE SITE AND SAFE CARRIAGE OF ITS FROM SITE TO ANY PVVNL STORE INCLUDING LOADING AND UNLOADING BOTH ENDS. 37 Replacement of 33KV 01 NO. Control Pannals/s Luharli under EDD Dadri 38 Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 39 TO 41 39 33KV VCB WITH DOUBLE T/F CONTROL PANEL 40 4X2.5MM CONTROL CABLE 41 2X2.5MM CONTROL CABLE 42 Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO. 43 INSTALLATION AND COMMISSIONING OF 33KV VCB AND DOUBLE T/F CONTROL PANEL WITH MAKING OF FOUNDATION & PLINTH AND COMPLETE WORK IN ALL RESEPCT. 44 FIXING AND CONNECTING OF LT 4X2.5SQMM CONTROL CABLE AT VCB. 45 FIXING AND CONNECTING OF LT2X2.5SQMM CONTROL CABLE AT VCB. 46 PROPER MAINTENANCE OF CABLE TRENCH AT SUBSTATION. 47 REMOVAL AND DISMENTALING OF OLD & DAMAGED 01 NO. 33KV VCB AND DOUBLE T/F CONTROL PANELFROM THE SITE AND SAFE CARRIAGE OF ITS FROM SITE TO ANY PVVNL STORE INCLUDING LOADING AND UNLOADING BOTH ENDS. 48 Replacement of 11 KV 03 NO. O/G VCB and 11 KV 01 No I/C VCB for s/s Chitehra under EDD Dadri 49 Safe carriage of following stock material, from any of the Store Center of PVVNL to work siteincluding Loading from Store and safe unloading at site for Item No. 50 TO 51 50 11KV VCB O/G 200/100/5A 51 11KV VCB I/C 600/300/5A 52 Errection of above Following material and Supply and errection of the DE-CENTRALISED material for completing the works as per RESPO. 53 INSTALLATION AND COMMISSIONING OF 11KV O/G VCB WITH MAKING OF FOUNDATION & PLINTH AND COMPLETE WORK IN ALL RESEPCT. 54 INSTALLATION AND COMMISSIONING OF 11KV I/G VCB WITH MAKING OF FOUNDATION & PLINTH AND COMPLETE WORK IN ALL RESEPCT. 55 REMOVAL AND DISMENTALING OF OLD & DAMAGED 4 NO. 11KV VCBFROM THE SITE AND SAFE CARRIAGE OF ITS FROM SITE TO ANY PVVNL STORE INCLUDING LOADING AND UNLOADING BOTH ENDS.

Contact Information

Other Detail