|
Tender For 81146 Special Repair To Bldg No P-3 (Inliving Sailors Block) At Ins Jarawa Under Ge Haddo, Port Blair-- 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Enigneer-in-charge. 2 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed. 3 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 to recieve tiles complete all as specified and directed. 4 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed. 5 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 to recieve tilescomplete all as specified and directed. 6 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed. 7 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed. 8 M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and as directed. 9 Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 10 M&L for 14-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 11 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. 12 M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4complete all as specified and directed by Engineer-in-charge. 13 M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in skirting/dado over and including 10mm thick screed bed in CM 1:3 complete all as specified and directed. 14 Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed by Engineer-in-charge. 15 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 16 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by Engineer-in-charge. 17 M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and directed by Engineer-in-charge. 18 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 19 S&Fframed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works like cooler stand conforming to Fe-290, Gde -E-165 complete all as specified and as directed. 20 S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed. 21 M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throatingcomplete all as specified and as directed. 22 M&L forapplying two coat of synthetic enamel paint over a coat of red oxide primer includingpreparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed. 23 M&L forapplying two coat of synthetic enamel paint includingpreparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed. 24 M&L for 20mm thick plaster on RCC roof slab in CM 1:4 including liquid water proofing compound @ 200ml per 50 Kg cement bagcomplete all as specified and directed by Engineer-in-charge. Note : Water Proofing Compound shall be measured and paid seperately under relevant items. 25 Supply only liquid water proofing compound complete all as specified. 26 M&L for applying a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by APP modified polymeric membrane 3mm thick, minimum weight not less than 3 Kg/Sqm, reinforced with polyester non-woven fabric weight not less than 150 Gm/Sqm laid as per the manufacturers instruction with side over lap of 100mm and end over lap of 150mm, tucked into the chases on vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqmn complete all as specified and as directed. 27 Dismantling of wallandceilingboards(fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. 28 S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed by Engineer-in-charge. 29 M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed by Engineer-in-Charge. 30 Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and as directed. 31 M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound complete all as specified and directed. 32 M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in mass concrete, sunken floor complete all as specified and as directed by Engineer-in-Charge. 33 M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, padding, sunken, coping portion rounded chamfered on edge complete all as specified and as directed. 34 M&L 15mm thick rendering in cement mortar 1:3 as in sunken floors mixed with liquid water proofing compound @ 200ml per 50 Kg cement bag finishing the surface fair and even complete all as specified and as directed.Note : Water Proofing Compound shall be measured and paid seperately under relevant items. 35 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 36 M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) inslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja/facia and the like complete all as specified and directed 37 M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. 38 M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm widecomplete all as specified and as directed. 39 M&L for mild steel TMT(CRS) bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 40 Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and directed. 41 M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and settingin cement mortar 1:4 complete all as specified and as directed. 42 M&L for precast cement concrete louveres and jallies 100mm thick(measured solid), including all mouldings, type B0, 1:2:4 (using 12.5mm graded stone aggregate) and set in cement mortar 1:4 complete all as specified and as directed. 43 Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 44 M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cementcomplete all as specified and directed. 45 M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and directed. 46 M&L for applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatmentcomplete all as specified and directed. 47 Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion as per manufacturers instructions or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :-Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms 48 M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified. Note : Water Proofing Compound shall be measured and paid seperately under relevant items. 49 M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. 50 M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. 51 M&L for 10mm thick plaster in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified & directed. 52 M&L for preparation of newly plastered ceiling surface and applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty complete all as specified and as directed. 53 M&L for applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed 54 Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. 55 Taking down Chowkatsexc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed. 56 Taking down shutter of any description n. exc 1 Sqm each complete all as specified and directed. 57 Taking down shutter of any description exc 1 Sqm but n. exc2 sqm each complete all as specified and directed. 58 Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongery complete all as specified and directed. 59 Taking down shutter of any description exc 1 Sqm but n. exc2 sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongery complete all as specified and directed. 60 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed. 61 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded prelam PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheetfor top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing 62 M&L for anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified. 63 M&L for anodised aluminium door shutters, aluminium section weighing not less than 1.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading screws etc complete all as specified.Note : Supply only floor spring, glass, SS friction hinges,particle board, wire gauze shall be measured and paid seperately under relevant items 64 M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified complete all as specified.Note : Supply only glass, particle board, wire gauze shall be measured and paid seperately under relevant items. 65 M&L for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/Imax hinges 01 No, hinges type B-21 100mm long 02 Nos suitable handle 01 No per shutter or as required etc complete all as specified Note : Supply only glass, particle board, wire gauze shall be measured and paid seperately under relevant items. 66 S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. 67 S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. 68 S&F for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 69 S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed. 70 S&F 30mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. 71 S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed. 72 M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girthcomplete all as specified and directed. 73 M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applyingonecoat of synthetic enamel paintsover 10cm width or girth complete all as specified and directed. 74 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone or steel/ aluminium frame concrete or brick surrounds, glazed complete all as specified and directed. 75 S&F figured glass, pin head type sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and directed. 76 S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each panecomplete all as specified and directed. 77 S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter exc 0.5 Sqm in each pane complete all as specified and directed. 78 S&F sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane complete all as specified and directed. 79 S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame workcomplete all as specified and directed. 80 M&L for 18mm thick MDF boarding (Fire and water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Note : (i) Cutting edges of cupboard shutter/ shelves shall be finished with adhesive edge binding tape all as directed 81 S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples complete all as specified and as directed. 82 S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples complete all as specified and directed. 83 S&F 100mm stainless steel Hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and directed. 84 S&F stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed. 85 S&F 100mm size stainless steel butt hinges medium weight complete all as specified and directed. 86 S&F 150mm aluminium, anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. 87 S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed. 88 S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. 89 S&F floor door stopper ofaluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and directed. 90 Dismantling PVC water tanks exc 500 Ltr but n. exc 1000 Ltr capacity and removing to store complete all as specified and directed. 91 S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outletcomplete all as specified and directed. 92 Taking up or down 25 or 32 mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. 93 S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified and directed. 94 Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed. 95 S&F of 32mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete as specified and directed. 96 S&F 32mm boregun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and directed. 97 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. 98 S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed. 99 S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed. 100 S&F in repair PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed. 101 S&F in repair PVC (SWR) 110mm dia bend with access door of any radius and jointed with approved adhesive complete all as specified and directed. 102 S&F in repair PVC (SWR) 110mm dia junction single (single T) equal or unequal and jointed with approved adhesive complete all as specified and as directed by Engineer-in-Charge. 103 S&F in repair PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed. 104 S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed. 105 S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed. 106 S&F in repair PVC (SWR) bend 75mm dia of any radius as required and jointed with approved adhesive complete all as specified and directed. 107 S&F in repair PVC (SWR) bend 75mm dia with access door, any radius as required and jointed with approved adhesive complete all as specified and directed. 108 S&F in repair PVC (SWR) 75mm dia junction single (single T) equal or unequal and jointed with approved adhesive complete all as specified and directed. 109 S&F in repair75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as specified and directed. 110 Cutting holes into or through brick walls built in cement mortar superficial area exc 150 Sqcm but n. exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. 111 S&F in repair vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed. 112 S&F plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed. 113 S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed. 114 S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. 115 S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified and directed. 116 S&F in repair Vitreous China Urinal, half stall type (back or corner wall type), white complete including providing and fixingplugs, bedding urinal against wall in cement mortar 1:2, securing urinal toplug with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and directed. 117 S&F 15mm dia brass CP urinal spreader complete all as specified and directed. 118 S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed. 119 S&F 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed. 120 S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 121 S&F in repair chromium plated brass shower roses with or without swivel joints square type 125mm size including shower arm complete all as specified and directed. 122 S&F in repair 20 mm dia brass stainless steel tubular towel rail D type600mm long complete all as specified and directed. 123 S&F chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. 124 S&F in repair curtain rods 25mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. 125 S&F 5mm thick looking mirror with 4mm PVC plain board and 40mm wide acrylic beading of selected quality glassas required size fixed with stainless steel glass fastener complete all as specified and directed. 126 S&F stainless steel hanger of size 450x3.5x1mm thick having minimum 6 pegs suitable for hanging cloths and fixed with minimum 2 Nos stainless screws complete all as specified and directed. 127 S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified and directed. 128 S&F in repair two way bib cock, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. 129 S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed. 130 S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. 131 S&F in repair 15mm concealed type angle cock cast copper alloy,fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unioncomplete all as specified and directed. 132 M&L for taking down carefully existing aluminium /copper point wiring, (light, fan socket or power) unscrewing from board/outlet boxes such as switches, sockets, ceiling rose, lamp holder and regulator etc and making good disturbed surfaces on walls, floors, ceilings etc complete all as specified and directed. 133 M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed. 134 M&L for taking down unserviceable main switches, DBs, and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed. 135 M&L for taking down unserviceable light fittings of any type complete all as specified and directed. 136 M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutraland green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including sunk pressed steel terminal boxesflush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified complete all as specified and directed. (In ceiling portion surface conduit wiring shall be carried out)Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.Contd......./- 137 Contd..../-(d) Electric wiring testafter completion of wiring to be submitted before claiming the payment.(e) Cutting chases in wall/floor beam/ceiling to be concealed conduit and making good the disturbed surfaces. 138 One light/fan point controlled by one way switch 5 Amps. 139 One switch socket 3 pin 5 Amps flush type on independent board. 140 One 3 pin socket outlet 5 Amps flush type on the same board with other switches. 141 One light point controlled by two way switch. 142 All as per Item No 135 here-in-before but with two single core 4 Sqmm FRLSH cable one 4.0 Sqmm green colour cable as earth continuity conductor for one socket 3 pin 15 Amps flush type/ Metal clad switch on independent board complete all as specified and directed. 143 S&F for switchmodulartype, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed 144 S&F for switchmodulartype, 16 Amps 1 module, 230 volts AC circuitcomplete all as specified and directed 145 S&F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuitcomplete all as specified and directed 146 S&F Socketoutlet 2 in 1 modular type,3 pin, 6 and 16, universal complete all as specified and directed 147 S&F Switch modular type, single pole two way 5 amps complete all as specified and directed 148 S&F ceiling rose, 3 terminal polycarbonate isolated body complete all as specified and directed 149 S&F stepped type electronic fan regulator modular type complete all as specified and directed 150 S&F andtesting Tube light fittings LED 20 watts 4 feet 100lm/watt, aluminium body including all accessories and fixing arrangements for fixing the light fitting complete complete all as specified and directed. 151 S&F andtesting Tube light fittings LED 10 watts 2 feet100lm/watt, aluminium body including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. 152 S&F30 wattsLED building security light fittings , pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessaryfixing arrangements as per site requirements complete all as specified and directed. 153 S&F LED slim panel lighting fixture of 18 Watt recessmounted220V , 50Hzwith finished in premium white powder coating ,environmental friendly energy efficient fitting recessmounted round/squarein shape(Warm white/ white colour as per requirement of site) complete all as specified and directed. 154 S&F of 18 watts surface mounted LED light fitting , white/yellow colour as reuired as sitewith slim high perfomanance surfaced mounted LED light fittings, round/square shape as required at site made from die-cast aluminium and CRCA covering, powder coated in white complete all as specified and directed. 155 Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to E/M store complete all as specified and as directed. 156 Taking down Exhaust fan of any size, sealing cable end, dismantling blades and removing fan and blades to store all as specified and directed by Engineer-in-Charge 157 S&F BLDC 5-star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz, 28 wattwith all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. 158 S&F high speed air ventilating fan 300mm sweep single ph, 230 volt, steel body with louvers 1400 rpm including all necessary fixing arrangement complete all as specified and as directed. 159 S&F GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building security light complete all as specified and as directed. 160 M&L submain wiring with 4 runs of10.0 sqmm multistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of10.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping of suitable size but not less than 32 mm width complete all as directed.Note :5 runs of 10.0 sqmm cable alongwith PVC casing & caping will be masured as one unit 161 All as per Item No 155 above but but 4 runs of6.0 sqmm complete all as specified and directed.Note:- 5 runs of 6.0 sqmm cable alongwith PVC casing & caping will be masured as one unit 162 All as per Item No 155 above but but 2 runs of6.0 sqmm with casing and caping 25mm width complete all as specified and directed. 163 All as per Item No 155 above but but 2 runs of4.0 sqmm with casing and caping 25mm width complete all as specified and directed. 164 Notes for Item Nos 157 to 158(i) 3 Length of cable and one length of casing caping shall be measured and paid for one length. 165 S&F DB VTPN sheet metal enclosure double door IP 54 protection, door earthsuitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP. Triple pole and neutral 415V 4-Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete and making good to the distrubed surface /walls complete all as specified and directed. 166 All as per Item No 159.00 above but 6-way complete all as specified and as directed. 167 S&F single pole and neutral sheet steel powder coated Distribution board IP54 protection with door earthing for MCBs fitted with 200 Amps rated bus bar, Neutral link ,Earth Bar and Din rail suitable for use on 240V, 50 Hz supply doubledoor SP&N DB system 12 ways and making good to the distrubed surface /walls complete all as specified and as directed. 168 All as per Item No 161.00 above but 8-way complete all as specified and as directed. 169 S&F MCCB 4 pole, 125 Amps, 16 kA ,415 volts, adjustable thermal setting type with spreader, barrier complete all as specified and as directed. 170 S&F MCCB 4 pole, 80 Amps, 16 kA ,415 volts, adjustable thermal setting type with spreader, barrier complete all as specified and as directed. 171 S&F MCB TP 63 Amps (`C’ series) having current rating 10 kA complete all as specified and as directed. 172 S&F MCB SPN 40 Amps (`C’ series) having current rating 10 kA complete complete all as specified and as directed. 173 S&F MCB SP 06-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.complete all as specified and as directed. 174 Notes for Item Nos 159 to 167(i) Termination of all wiring to MCBs/ MCCBs/DBs shall be through copper lugs/ thimbles of adequate capacity 175 Earthing complete with galvanisedearth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means boltsand nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh.RCC cover with etc including necessary excavation in any type of strata , returning, fillingremoval of soil outside MD land ,filling ofcharcoal andsalt complete all as shown in electrical plate No.3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item(ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit, test point complete
|
