|
Construction Of 100Mt. Storage Godown At Brahmapur Skus Ltd., Dist. Murshidabad - - Godown cum Office with Lavatory and RoadEarth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. 2 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation offoundation. 3 b) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth.. 4 Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity 5 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 6 Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor(A) [Pakur Variety], 1:3:6 proportion. 7 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. 8 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 9 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 10 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. 11 Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides ( upto a height of 300 mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS-6313 (part -II) 1981.( Mode of measurment will be the plan area of foundation treated.) 12 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)gr floor 13 Brick work with 1st class bricks in cement mortar (1:6) as specifieda) In foundation upto Plinth level 14 b) In Superstructure at all roof 15 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] a) 20mm thk. Plaster with (1:6) cement sand mortar at all elevations (outside). 16 b) 15mm thk. Plaster with (1:6) cement sand mortar at all elevations (inside). 17 c) 10mm thk. Plaster with (1:4) cement sand mortar at all elevations. 18 Labour for Chipping of concrete surface before taking up Plastering work. 19 Neat cement punning in plinth outside face,bunker floors, stair railings etc. at all elevations 20 Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. 21 Synthetic Enamel Paint on Steel / wooden surface, 2 coats of approved brand over a coat of primer, as directed complete after proper scraping and cleaning the surface. One coat (with any shade except white) 22 White washing including cleaning & smoothening the surface thoroughly (5 parts of stone lime and one part of shell lime should be used in finishing coat) - 3 (three) coats at all elevations. 23 Applying Exterior grade Acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receivedecorative textured (matt finish) or smooth finish acrylic exterioremulsion paint including scraping and preparing the surface throughly,complete as per manufacturer"s specification and as per direction of theEIC. Two Coats 24 Protective and Decorative Acrylic exterior emulsion paint of approvedquality, as per manufacturer"s specification and as per direction ofEngineer-in-Charge to be applied over acrylic primer as required. Therate includes cost of material, labour, scaffolding and all incidentalcharges but excluding the cost of primer. In Ground floor (Two Coat) Premium 100% Acrylic Emulsion 25 Supplying, fitting, fixing steel window conforming to I.S. 1038- 1975 & manufactured from rolled steel sections conforming to I.S.S. with best quality glazing 3mm thick sheet glass, putty of approved make & brand, fixing lugs with cement concrete (1:2:4)including cutting holes to walls and mending good the damages with handle and peg & stayas directed complete.a) Openable type - 26 M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.(Grills weight - 14 to16 kg./sq.m.) 27 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local. 28 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings. In ground floor. 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 29 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cementa) 35 mm. thick 30 Orissa pattern water closet in white glazed vitreous chinaware of approved make supplied,fitted & fixed in positionincluding "P"or "S" trap complete as directed - 580 mm X 440 mm 31 Supplying fitting & fixing Flat Back Urinal in white glazed vitreous chinaware of approved make including waste connection etc. as necessary complete as directed - 465mmx355mmx265mm. 32 Supplying, fitting, fixing in position High Density Polythene pipes at all elevations with all accessaries, specials, socktes, bends, tees, unions,nipples, short pieces etc.including cutting pipes,making threads, cutting trenches upto 1M.from G.L. and refilling the same complete. a) 25mm dia. Pipes 33 b) 15mm dia. Pipes 34 Supplying fitting & fixing with cement jointing (1:3) salt glazed stone ware pipe of 100mm dia. including earthwork etc. as necessary complete as directed 35 Supplying fitting & fixing S.W.Bend with door sealing with cement morter (1:4) in position complete as directed - 100mm dia. 36 Supplying fitting & fixing stone ware T/Y junction with cement jointing (1:3) with jute gasket soaked in cement slurry in position complete as directed - 100mm dia.600mm long.(Single) 37 Supplying fitting & fixing C.P. towel rail with brackets complete - 25mm dia., 600mm long 38 Supplying fitting & fixing Mirror 5.5mm thk. of approved make with silvering as per I.S.I. specification supported on fibre glass frame complete - 550mm x 400mm 39 Supply & installation of PVC water storage Tank of approved quality in position with closed top with lid as per direction complete - 500 Litres. 40 Wash Basin white glazed vitreous china best quality approved make wash basin with C.I brackets on 75 mmX 75mm wooden blocks ,C.P waist fittings 32mm dia, one approvedquality brass C.T. Piller cock of 15mm dia, C.P chain with rubber pluge of 30mm dia,approved quality P.V.C waist pipe with C.P. nut, 32mm dia ,900mm long approved quality P.V.Cconnection pipe with heavy brass C.P nutincluding mending good all damages and painting the brackets with two coarse of approved paint.550mmx400mm 41 Supplying, fitting, fixing Stop/Bib cock,PVC make - 15mm dia. 42 Supplying fitting and fixing in position including all cost of materials, labour etc. as directed complete a) M.S. Clamp 40mm x 6mm x 125mm upto 170mm length 43 b) Iron butt hinges 75mm x 40mm x 1.12mm 44 c) Iron butt hinges 100mm x 58mm x 1.90mm 45 d) Anodised aluminium catch hook-150mm long 46 e) Anodised aluminium socket bolt-100mm long x 10mm dia. 47 f) Anodised aluminium socket bolt-150mm longx 10mm dia. 48 g) Iron hasp bolt,16mm dia. - 300mm long 49 i) Iron door ring -75mm dia. 50 j) Wooden hinge cleat (sal) - 75mm long including 62mm long iron butt hinge 51 k) Wooden buffer block (sal) - 125mm long 52 Supplying, fitting, fixing in position R.C.C. Manhole / Pit cover with rim of approved make (Heavy Type) - 450mm dia. 53 Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge. 54 Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc.In ground floor. 55 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting will be made seperately(a) For Exposed Work100 mm 56 Road Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary(a) Depth up to 150 mm. 57 (b) For each additional Depth of 150mm and part therof 58 Extra for manual compaction of earth by rammers / hand roller in 250 mm layers including watering etc. if required. (Borrow pit measurement 59 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity 60 Providing, laying, spreading and compacting stoneaggregates of specific sizes to water boundmacadam specification including spreading inuniform thickness, hand packing, rolling withvibratory roller 8-10 tonnes in stages to proper gradeand camber, applying and brooming requisite typeof screening / binding materials to fill up theinterstices of coarse aggregate, watering includinglighting, guarding, barricading and makingnecessary earthen bundh of one metre width oneach side and preparing the bed by necessarycutting or filling, including cost of all materials andhire and labour charges of all men and machineryand compacting to the required density, as perClause 404 of Specifications for Road & Bridge Worksof MoRT&H (5th Revision(ii) Grading-I Aggregate (63 mm to 45 mm) UsingStone Screening Type B (11.2 mm)B. Manual Means 61 (iii) Grading-II Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B (11.2 mmB. Manual Means 62 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. 63 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 64 B - Electrical workSupplying and fixing Sheet steel 32A Main Switches onflat iron frame on wall [{Page no D-1 item no 1(a)} Schedule 2017] 65 Supplying and fixing double-door 2+4 way SPN MCB DistributionBoard with IP-42/43 protection, concealed in wall aftercutting the wall & mending good the damages tooriginal finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthingattachment. [Approved make] [{Page no D-9 item no 13} Schedule 2017] 66 Supplying and fixing 240/415 V MCB of Breakingcapacity 10kA & C characteristics on Legrand 6-32A SP @ {Schedule Page no D-6 item no 7} 2017 67 Supplying and fixing 240/415 V 32A DP MCB Isolator ondin rail of existing DBs and necessary connection.[{Page no D-5 item no 6} Schedule 2017] 68 Wiring in 1.1 KV grade single core stranded "FR" PVCinsulated & unsheathed copper wireof following sizes in 25mm PVC casing-capping (Precisionmake) incl. necy. PVC clips, fittings etc. (a) {2 x 4 sqmm + 1 x 2.5 sqmm}for TPN DB to AC M/c [Approved make] [D-1,(e)/ Pg. E-11, PWD Schedule 2017] 69 (b) {2 x 2.5 sqmm + 1 x 1.5 sqmm} for TPN DB to Power plug/Computer [Approved make] [D-1,(c)/ Pg. E-11, PWD Schedule 2017] 70 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) singlecore stranded "FR" PVC insulated & unsheathed copper wire(Brand approved by EIC) in suitable size PVC casing-capping(Precision make) with 1x22/0.3 (1.5 sqmm) single corestranded "FR" PVC insulated & unsheathed copper wire forECC, incl. necy. PVC clips, fittings etc. to light/fan/call bellpoint with piano key type switch (Anchor make) fixed on sheetsteel fabricated switch board with Perspex/bakelite top coveron wall incl. necy. connections and making earthingattachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface](a) Average run 5 mtr [2/ Pg. E-11, PWD Schedule 2017] 71 (b) Average run 8 mtr [2/ Pg. E-11, PWD Schedule 2017] 72 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm)single core stranded "FR" PVC insulated & unsheathedcopper wire (Brand approved by EIC) in suitable size PVCcasing-capping (Precision make) with 1x22/0.3 (1.5 sqmm)single core stranded "FR" PVC insulated & unsheathedcopper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3pin flush type plug socket with piano key type switch (Anchormake) fixed on sheet steel fabricated CRC MS switch boardwith bakelite/perspex (wall matching color) top cover of 3 mmthick flushed in wall by housing the board after cutting brickwall incl. necy. connection making earthing attachment,painting and mending good damages to building works [PVCcasing-capping and plug box both on surface](a) On Board [6/ Pg. E-12, PWD Schedule 2017] 73 (b) Average run 1.5 mtr for Separate board [6/ Pg. E-12, PWD Schedule 2017] 74 Supply & Fixing 240 V, 20A, plug socket with separate 20 APiano key type switch (Anchor make) on sheetmetal switch board embedded in wall incl. S & F150x100x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws aftermaking housing for switch by cutting bakelite/perspex coverand making necessary connections as required[22/ Pg. E-6, PWD Schedule 2017] 75 Supply & Fixing only ceiling fan complete with blades, canopy, fork, rubberbush etc. incl. S&F connecting wire for down rod upto 30 cm incl.painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire.[21(A)/ Pg. C-3, PWD Schedule 2017] 76 Supply & Fixing twin LED 20W T8 tube with double Patti suitable for 1x4 Feet LED Tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed onceiling with sutable size 4 nos. fastener and other side connectedwith the conduit with suitable size of bolts and nuts incl. S&F EIconduit, “L” type (125mmx125mm) 6mm thick and 25mm with MSclamps and connecting the length of PVC insulated wire andmending good damages to original finish and painting etc. by2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. {PWD Schedule Page no C-2 item no 17} 2017 77 Add 18% G.S.T. + 1% L.W.Cess
|
