|
Tender For Construction Of Mini Tube Well At Dumping Ground Bhaipura.; 1 carting of boring machine 2 Carting of boring machine & materials as casing pipe caping set T & P etc. from store to site and return of above assembly after completion of work 3 Supply of Tubewell Assembly 4 225 mm dia pipe Housing pipe of 10 kg pressure cm2 ISI Mark. 5 225 mm dia pvc slotted pipeof 10 kg pressure cm2 ISI Mark 6 Drilling of Bore 7 Drilling of 600 m bore from GL to 60m BGL 8 Drilling of 600mm Bore 60 M to105 M BGL 9 Water arrangement for construction of T.W 10 Lowering of Tubewell assembly 11 Lowering of 225 mm dia pvc pipe from GL to 50 m BGL 12 Lowering of 225 mm dia pvcBlind/Slotted pipe from 50 m to 100 BGL. 13 Supply of 1.6 mm to 4.8 mm size pea gravel from Lal Quan Quarry 14 Development of Tubewell 15 Erection of compressor Unit and cap equipage 16 Dismantling of above after completion of work 17 Development of Tube Well by 250 PSI Capacity air Compressor 18 Erection of O.P Unit and Camp equipage 19 Dismentling of above after completion of work 20 Development of Tube Well by O.P Unit 21 Yield and Verticality test of Tube Well 22 Chemical and bacteriological test of water. 23 Rental charges of Rig Machine, Air compressor and O.P Unit 24 Site Clearance after completion of T.W & cutting, welding of well cap after development and earth filling in water pits. 25 PUMPING PLANT FOR TUBEWELL 26 Switch gear panel for 15 HP along with cubical panel, starter , power wring and earthing material complete in all resect. 27 10H.P. ISI mark submersible motor pump set 28 6.00 mm three core flat P.V.C. cable submersible use, IS 694 make Havells, finolex 29 Construction of mini tube well chamber as per type of design and direction of engineer in charge including all materials labours T&P etc completion of work 30 Installation charges including angle iron frame box ply board and fixing materials etc. complete. 31 Supply of ‘B’ class ISI mark M.S. pipe 100 mm dia flang in the length of 3 mts. as per (IS 3589-200) 32 Supply & fixing of C.I.D.F. Reflux valve 100 mm dia ISI mark heavy duty 33 Supply & Fixing CIDF sluice valve 100 mm dia I.S 14846, CI Body/Wedge/brozegings/SS 410 shaft construction SS IS 6603 (ISI marked) 34 Installation of Electrical fitting charge with all labour and t&P etc complete of work 35 Connection with main line including cutting of main line & all required item’s(PVC)up to 15m 36 Excavation in foundations in ordinary soil ( Loam clay or sand ) including lift up to 1.5 m and lead up to 30.0 meter and including filling, watering and ramming of excavated earth in to the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer- in charges up to a distance of 30 m from the foundation trenches 37 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) 38 Ist.Classbrickworkin1:4cement andlocalmortarinfoundationandplinth including supply of all material,labour T & P etc. required for proper completion of work. 39 First class brick work in 1:4 cement and coarse sand mortar in Super Structure brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. 40 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and Footing 41 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Beam 42 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Column or Wall 43 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab 44 Supply, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications including supply of all material, labour, Tools & Plants etc. required for proper completion of work 45 12 mm thick Plaster with cement& course Sand of 1.25 FM Mortar in 1:4 46 Supplying of Earth for cutting or in embankment in ordinary soilearth work in filling or embankment to be in 20 cm layers, including ,watering ,Dressing ,compacting ,ramming the soil to achive 95% proctor density ,and dressing the surface to be required levels and slope and also including1.50m lift and 30 m lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance and cartage upto 8Km distance as directed by the Engineer-in-charge 47 Sand filling in plinth including supply of necessary quantity of sand from a distnce not exceeding 8 Km. from the site of work & including wstering, dressing etc. Rate includes cost of all materials, labour, T&P etc. required for proper complition of the work. 48 Laying cement concret with cement, c.sand and 20 mm stone grit in 1:2:4 49 2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1") graded approved stone grit, laid inpanels finished with 3 mm. (1/8") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3") thick base concrete consisting of cement, fine sand of 1.25fineness modulus and brick ballast 4 cm.(1½") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. requiredfor proper completion of the work. 50 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 51 Finishing wall with weather coat paint (Asian or Berger Brand) on new surface with two coat to give an even shadeincluding supply of all material, labour & tools and plants etc. requiredfor proper completion of the work. 52 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work 53 Apply two coat superior synthetic enamal paint including primer coat on steel surface 54 Providing of wall painting with make picture and slogan and writing making base of all work complete. 55 Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: 12.19.1 With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 56 Providing and laying of 600x600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 57 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 58 Supply and Fixing of 11 cm internal dia PVC down pipe (kissan/suprime make) complete with bends with door at top and plain at bottom and grantings and including supply of necessary MS clamp 2.5cm X 3mm Fixed to wall with cement mortar 1:2 and including supply of 15cm long 6mm dia nail all material, labour and T&P etc. required for proper completion of work and also includingrepair of plaster pointing etc.if damaged during fixing of pipe. 59 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc. 60 20 mm nominal outer dia .Pipes. 513.75X0.85=436.68 61 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 62 20mm nominal bore 461.75X0.85=392.48 63 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require 64 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 2731.45X0.85=2321.73 65 Providing and fixing white vitreous china squatting plate urinal withintegral rim longitudinal flush pipe. 66 Providing and Fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing sistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever require White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 5781.35X0.85=4914.14 67 Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as 68 earth continuity wire and piano type switch etc. complete in all respects. 69 Same as item No. (1) but for fanandlight duty exhaust fan. 70 Same as item No.(1) but for5amp plug point with piano type switch and socket etc. 71 Supply & installation of Metal LED Bulb (White, 20 Watts) of approved make Havells make 72 Supply and burying of 40mm dia x 4.5meters long G.I. pipe, vertically for earthing having 12 mm dia. Holes spaced 75mm apart drilled upto 2 meters from the bottom complete with earthing lead of no 6 to 8 SWG GI wire in GI pipe upto appron (and from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I. box 73 with hinged cover, masonary enclosue, funnel at top, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. 74 Supply & fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipefor earthing, laid in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the wirk as directed at site. 75 Supply and fixing of 240 volts "L" series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 76 Supply and fixing of flush/surface mounting distribution boards complete in all respects. 8Way SPN 77 Supply & installation of Ceiling Fan(1200mm dia) of approved make Havells make 78 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects.
|
