|
Support Belt For Brushcutter Operator, With Practical Attachment System On The Chest, With Back Support, 5Cm Wide And Padded Straps, Weight 500 Gr., Lower Limb Protection Safety Footwear, Waterproof Boot Type, Made Of Polyvinyl Chloride ( Pvc) Injected In One Piece With Upper Closure In Gaiter With Lace For Adjustment; With Available Numbering 33 To 46; Upper Color Black And Yellow Gaiter; Long Shaft 33.5 Cm + Gaiter 6.5 Cm Reference To Size Number 40, Non-Slip Sole, Pvc Reinforced With Nitrile Mass For Greater Chemical Resistance. Material Must Be Certified With Mte, Manufacturer Has Certifications: Abnt Nbr Iso 20347:2008; Abnt Nbr Iso 20344:2008., Lower Limb Protection Boot-Type Safety Footwear, Blatt Model, Made Of Water-Repellent Microfiber Fabric, Color Black, Back Made Of Synthetic Material With Pu Foam And Lined In Non-Woven Fabric, Full Internal Lining In Non-Woven Fabric And Doubled Blanket, Has Single, Double And Quadruple Seams, Mounting Insole Synthetic “Strobel” System, Comfort Insole In Antimicrobial Eva, Bidensity Sole In Two Layers Of Expanded Pu Injected Directly Into The Fuel Oil Resistant Upper, Plastic Toe Cap Only For Conformation, Quick Wear With Side Elastic Closure, Buttress In Thermoformed Resin Material, Available Numbering From 33 To 47, Upper Resistant To Penetration And Absorption Of Water (Wru). Have Certificate With Mte, Manufacturer With Iso Certifications And Has Certifications: Abnt Iso 9001, Abnt Nbr Iso 20.344/2008, Abnt Nbr Iso 20.347/2008., Upper Limb Protection Type Safety Glove Knitted In Seamless Cotton And Polyester Threads , With Nitrile Rubber Bath For Chemical Protection Protecting The Palm, Back, Fingers And Fingertips, Spandex Wrist Closure, Final Overlock Finish, Available Sizes 7”(P), 8”(M), 9”(L) And 10”(Lg), Levels Of Performance Against Mechanical Risks En 388: 3241. Must Meet Standards En 388/2003, En 420/2003. Material Must Have A Certificate Of Approval From The Mte., Safety Glove Type Upper Limb Protection Made Of Scrape Leather On The Back And Cowhide Leather On The Palm, With Cowhide Reinforcement Strip Between The Thumb Fingers And Internal Index On The Palm, Oil Model , With Built-In Elastic On The Back, Total Length Of 27 Cm. Note: Variation Of + Or - 5Mm. Performance Levels Against Mechanical Risks, Minimum En 388: 3144. Must Meet Standards En 388/2003. Material Must Have A Certificate Of Approval From Mte., Hearing Aid Protection Of The Shell-Type Noise Muff Type For Sound Protection Superior To Those Established In No. 15 Annex I And Ii, Consisting Of Two Plastic Shells, Featuring Foam Cushions On Their Sides And Interior. It Has A Rigid Plastic Rod That Keeps The Shells Firmly Sealed Against The Skull, Protecting The Users Ear Region And Supporting The Shells. It Has A Rod With A Smooth Surface That Minimizes The Accumulation Of Dirt; Attachable Shells And Parts That Allow Complete Hygiene. Do Not Have Any Metal Parts, So They Can Be Used In Applications With Electrical Risk. Nrrfs Attenuation Degree 18. Ansi Certifications. S. 12.6:1997. Material With Certificate Of Approval From Mte., Face Protector With Safety Hood, Skirting Cap Type, Made Of Cotton Fabric (Denim), 30 Cm Neck Protector, Simple Adjustment On The Side
|
