|
Tender For Supply Of Safety Kits/Devices To Sewer And Septic Tank Workers At South Zone; 1 Safety Helmet with Torch Helmet -Made of ABS material (Acrylonitrile Butadiene Styrene) -8-point plastic or textile suspension system -Ratchet fit adjustment -Adjustable chin strap -The brushed cloth on foam sweatband - Cradle made of LDPE / Textile, Head band made of LDPE -The short peak for better upward visibility -Both side of the crown ventilated Torch With Triple Mode, High Quality, High Voltage, With AC Charging Light Output: High brightness of the torch. Beam Distance: Maximum distance the light can reach 50 meters Light Modes: Multiple lighting modes such as high, medium, SOS. Battery Type: Rechargeable lithium-ion battery. Charging Method: proprietary charging docks. Type of LED: High-quality LED brands. Color Temperature: 6000K (daylight) Spot Beam: Focused, long-distance illumination. Flood Beam: Wide, close-range illumination. Material: Durable materials like Polycarbonate, or ABS plastic. Weight: Lightweight design between 100g and 150g. EN 397, CE marked Each 44 2 Safety Tripod (with Winch Retractable Block and harness) Included in the Kit Tripod – • Portable Device for Confined Space – Entry and Retrieval • Height adjustments: 1.45 meters to 2.15 meters • Material: High-strength Aluminium Alloy • Strength: 22 kN • Safe Working Load Limit: 200 kgf • Standard: EN 795 – Class-B Winch – • Winch to be mounted on Tripod for Retrieval purpose • Wire Rope Length: 10m • Wire Rope Material: Galvanized Iron (GI) • Tensile Strength: 12 kN minimum • Safe Working Load: 150kg Retractable Block – • Retractable block works on Centrifugal Force • Material: Stainless Steel Wire rope • Length: 10 meters Tensile Strength is 12kN minimum. • Standard: Conforms to EN 360:2002 Confined Space Entry Exit Harness – • Anchor point One Dorsal D-ring and One Chest D-ring, Integrated rescue strap attached on shoulder. • Special features Ideally positioned sit-strap for extended comfort Built-in dual colour webbing for easy orientation. • Materials: Fray-proof dope-dyed polyester webbing Metal buckles of high strength alloy steel. • Stitching: High-strength polyester stitching. • Adjustability: Size adjustment straps only at chest and thighs. • Standard: IS3521 Class E Tripod - Conforms to EN 795 - Class-B Standard: Retractable Block Conforms to EN 360:2002, Harness Standard: IS3521 Class E Each 44 28 3 Axial Fan Blower (ATEX Approved) EXPLOSION PROOF ELECTRICAL METAL BLOWER Designed for applications requiring larger amounts of air output, the Explosion-Proof 12” (300 mm) Axial Blower offers a 3/4 HP single-phase motor with an efficient six-blade impeller in a rugged and lightweight metal housing. Certified to ATEX Standard ExdIIBT4Gb. SPECIFICATION: Diameter: 12" (300 mm); Voltage:240 V; Frequency: 50 Hz.; Speed: 2800 RPM; Free Air Capacity:2295 CFM (65 m³/min); Dimensions (MM): 44 x 40 x 40 cm.; Weight: 17 kg CONSTRUCTION: Complete unit epoxy powder coated in yellow; 16-gauge armour steel sheet housing; Silver metal coated grill for safety; Powered by a 3/4 hp motor; 6 blade precision balanced heavy duty aluminium alloy impeller; Motor equipped with thermal switch for overheat protection; Attached duct at either flange for intake or exhaust ventilation; All components are coated for greater wear resistance; Compliance: Certified to ATEX Standard ExdIIBT4Gb; Dynamically designed fan housing to optimizes airflow efficiency; Protective guards meeting OSHA standards; Impeller is designed for high Static pressure providing higher airflow rate; Equipped with four rubber feet; Integrated carrying handle for easy transport Certified to ATEX Standard ExdIIBT4Gb . Protective guards meeting OSHA standards. Each 44 4 Anti Static Conduit ANTISTATIC/CONDUCTIVE AIR DUCT 12" X 10 MTR This productise lightweight, retractable and designed for maximum air handling capabilities. Dual direction flow with low friction loss while providing a safe positive means of discharging static build-up. CONSTRUCTION: Vinyl and polyester anti-static materials; Single-Ply; Neoprene coated; Temperature range - 65°F to 250°F(-53°C to 121°C); Retractable, Non-collapsible design; Class 1hard drawn spring steel wire helix; Rated to 100,000 OHMS or less per square inch; Integrated with extended solid grounding wire at each end; Heat sealed seams for smoother surface for better air flow; Integral rigid duct end allows easy coupling of duct without the need for separate splicer accessory; Wire supported, on-collapsible; Close-pitched, wire-supported and features smooth interior walls for reduced flow restriction; Meet flame retardant material; Retractable for easier, safer storage; Diameter are 12” (300 mm); Length are 10 mtr. 44 5 Full Body (Wader Suit) The Full Body Wader Suit made from 09mm to 1mm waterproof PVC protects the user's body from water or any other fluid till the neck height. Made from durable, waterproof materials such as neoprene, PVC, rubber, or breathable fabrics like Gore-Tex. Outer Layer: High-denier nylon or polyester, often coated with polyurethane (PU) for waterproofing. Lining: Breathable membrane (e.g., Gore-Tex or equivalent), sometimes with an inner layer of micro fleece for insulation. Boots: Natural rubber or synthetic materials like neoprene, sometimes with a steel shank for added support. Waterproof Rating: Hydrostatic Head: Typically measured in millimetres (mm), with ratings such as 10,000 mm, 15,000 mm, or higher, indicating the material's ability to withstand water pressure. Breathability Rating: Measured in grams per square meter per 24 hours (g/m²/24h), indicating how much moisture vapor can pass through the fabric. Typical ratings are 5,000 g/m²/24h, 10,000 g/m²/24h, or higher. Seams: Construction: Double-stitched, taped, or welded seams to ensure waterproof integrity. Reinforcement: Additional reinforcement at stress points like knees, seat, and crotch. Boots: Material: 3.5mm to 5mm neoprene for insulation. Sole: Non-slip, cleated, or felt sole for traction. Insulation: Thinsulate or similar materials for thermal Each 44 29 protection. Durability: Abrasion Resistance: Measured by cycles or ratings such as 300D, 600D, or higher denier fabrics. Puncture Resistance: Tested against standards like ASTM or ISO. Weight: Typically measured in grams or pounds, with lighter suits being preferred for comfort and mobility. Temperature Rating: Indicated temperature range for comfort, e.g., suitable for use in temperatures ranging from -10°C to +20°C (14°F to 68°F). 6 Multi GAS Detector (LEL, O2, H2S, CO, CH4 PUMPED) MULTI GAS DETECTOR (LEL, O2, CO, H2S, CH4) LEL, O2, CO, H2S, CH4 sensor with rechargeable battery, charger, inbuilt pump and tubing (3 mtrs.)Measuring Range: LEL Sensor: 0 - 100 % LEL, O2 Sensor: 0 - 25 Vol.-%, CO Sensor: 0 - 1000 ppm & H2S Sensor: 0 - 100 ppm Resolution: LEL: 1% LEL, O2: 0.1%Vol, CO: 1 ppm & H2S: 0.1 ppm Battery: Lithium Ion rechargeable battery Run Time: Up to 14 hrs (diffusion) Up to 8 hrs (pumped) Charging Time < 4 hrs Enclosure: High impact rubberized polycarbonate case Drop Test: 3m (10 ft) Response Times (T90): LEL = 15 secs (IEC 60079-29-1) O2 = 12 secs (BSEN 50104) CO < 20 secs H2 S < 20 secs , Instruction Manual and Warranty Certificate
|
