|
Mechanized Excavation Of Trench With A Depth Of 1.5M To 3M (Average Between Upstream And Downstream), With Backhoe Loader (0.26 M3/88 Hp), Width Less Than 0.8M, In 1St Category Soil, In Locations With High Interference Level, Concrete Tube For Class Pa-1 Rainwater Collector Networks, With Tip And Bag Fitting, Nominal Diameter Of 400Mm, Concrete Tube Laying For Rainwater Collector Networks, 400 Mm Diameter, Rigid Joint, Installed In Location With Low Level Of Interference (Not Included Supply), Nominal Diameter Of 600 Mm, Diameter Of 600 Mm, Collection Box In Solid Brick Masonry 1, 13 Diameter Of 40Cm, Including Material And Labor, Buried Flow Distributor Box In Masonry With Solid Ceramic Bricks Internal Dimensions 1, 10X1, 10X100 With Concrete Cover For Rainwater Networks, Manual Trench Backfilling With Mechanized Compaction, Sheet Metal Construction Plate Of Galvanized Steel, Conventional Location Of Work Through Jig Of Pointed Running Boards With Reuse, Removal Of Metallic Tiles In A Mechanized Way, Using A Crane, With Reuse, Removal Of Metallic Mesh For Roofing (Framing, Bracing, Platbands) In A Form Manual, With Reuse, Removal Of Metallic Scissors With Spans Greater Or Equal To 8M In A Mechanized Way With Reuse, Removal Of Metallic Scissors With Spans Greater Or Equal To 8M In A Mechanized Way With Reuse, Mechanized Excavation For Crown Block Or Footing Without Forecast Form With Backhoe, Draining Layer Of Crushed Stone 1, Thickness 5Cm., Pre-Fabricated Concrete Cup, Concreting Of Blocks With Fck 25Mpa Concrete, Including Laying, Thickening And Finishing., Block Frame, Or Footing Using 8Mm Ca-50 Steel , Or Footing Using 10Mm Ca-50 Steel, Manual Backfilling Of Trench With Soil Compactor, Assembly Of Metal Structure Of Scissors Roof Bracing Metallic Tile Metallic Platband Pre-Molded Pillars And Pre-Molded Beams, Abrasive Blasting With Steel Shot On Metallic Profile, Painting With Base Alkyd Paint (Zarcao Type) Sprayed On A Metal Profile, Manual Excavation Of The Soil. Up To 1.30 M, Pumped Concrete Fck= 25Mpa; Including Preparation And Bonding, Ca-60 Steel Frame Ø 5.00 Mm; Including Supply, Cutting, Bending And Placement, Steel Frame Ca-50 Ø 10, Manufacture Assembly And Disassembly Of Shape For Baldrame Beam In Sawn Wood, Cleaning Of The Site
|
