Tender For Supply Of Furniture For Cricket Pavillion At Maharshi Dayanand University, Rohtak in India

Work Detail

Tender For Supply Of Furniture For Cricket Pavillion At Maharshi Dayanand University, Rohtak- 1 Conference Room Modular Table - 20 SeaterProviding & placing modular conference table where worktop shall be made of 25mm thick Prelaminated twin boatd E1-P2 grade and approved shade confirming to IS-12823:1990, edge banding with matching 2mm thick PVC lipping. Plastic ABS access flap is provided for easy access of wire and cables. The product shall be Greenguard UL, Green Pro, Indoor Advantage Gold and GRIHA & SVAGRIHA certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer.Understructure consist of 18mm thick prelaminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banding with matching 2mm thick PVC lipping. Alluminium alloy 63400 - WP profile is used for connecting panels together. The product should be in knock down construction.Modesty panels made of 18mm thick prelaminated twin boards ofE1-P2 grade and approved shade confirming to IS-12823:1990, edge banding with matching 2mm thick PVC lipping. Powder coated accent metal strip provided eblwo work surface to enhance asethics. It is made of .8mm thick CRCA as per IS 513, epoxy polyster powder coated DFT 40-60 microns.Wire management - An array of panels made of .8mm thick CRCA MS IS:513, epoxy polyster powder coated DF 40-60 microns is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided belwo the worktop. Cuout on top with two piece injection moulded plastic part polymer componenet is fitted to pull out audio, video cables on to worktop and connect devices charger to power socket below worktop. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 2 Conference Room - High Back ChairProviding and Placing chair with headrest where the seat shall be made up of 1.2 ±0.1cm thick hot pressed plywood. product shall be Greenpro, Indoor Advantage Gold & BIFMA level 2 certified. In case of Authorized Dealer, Completion certificates of execution of similar works experience by manufacturers and other credentials are also valid provided a consent letter is given by furniture manufacturer. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yam. The dimensions of seat should be 47.0cm(W) x 51.5(D) and that of back should be 45.0cm(W) x 65.3cm(H). The moulded polyurethane foam shall be ofdensity 55+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The armrests have up and down adjustment of 8.5+/-0.5 cm with PU armtop mounted on Armrest structure made of glass filled nylon. The lumbar support consists of polypropylene pad which has adjustment of 8.0+/-0.5 cm.The height of lumber can be adjusted through two projecting knobs provided on th erear side of the pad. The neckrest assemly consists of polypropylene pad with moulded PU foam & covered with polyster fabric. Neckrest is fixed to back assembly through Neckrest connector. Necrest assembly has height adjustment of 4.2+/-0.5 cm and rotation adjustment of overall 76.0+/-2.0 degrees. The complete neckrest assembbly is retro fit to main chair. The mechanism of the chair shall have following features : 360° revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestial shall be injection moulded in black 33% glass-filled Nylon-66. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.1+/- 0.5 cm pitch-centre-dia (76.1 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black Nylon.Overall dimensions of Chair shall be, Width of Chair - 76.1cm, Depth of Chair - 76.1 cm as measured from pedestal below. Height of back from ground - min 98.0 to max 108.0cm. Seat height - min 44.0 to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 3 Conference Room - Medium Back Revolving ChairProviding and Placing medium back chair where the seat shall be made up of 1.2 ±0.1cm thick hot pressed plywood. Product shall be Greenpro, Indoor Advantage Gold & BIFMA level 2 certified. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers and other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yam. The dimensions of seat should be 47.0cm(W) x 51.5(D) and that of back should be 45.0cm(W) x 65.3cm(H). The moulded polyurethane foam shall be ofdensity 55+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The armrests have up and down adjustment of 8.5+/-0.5 cm with PU armtop mounted on Armrest structure made of glass filled nylon. The lumbar support consists of polypropylene pad which has adjustment of 8.0+/-0.5 cm.The height of lumber can be adjusted through two projecting knobs provided on th erear side of the pad. The mechanism of the chair shall have following features : 360° revolving type, Single point control, Tilt tension adjustment, 4 position locking with antishock feature, seat back tilt ratio 1:2, front pivot for tilt with feet resting on ground ensuring more comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestial shall be injection moulded in black 33% glass-filled Nylon-66. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.1+/- 0.5 cm pitch-centre-dia (76.1 +/- 1.0 cm with castors). The twin wheel castors shall be made of Nylon injection moulded in black Nylon.Overall dimensions of Chair shall be, Width of Chair - 76.1cm, Depth of Chair - 76.1 cm as measured from pedestal below. Height of back from ground - min 98.0 to max 108.0cm. Seat height - min 44.0 to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 4 Players Sitting Area - Slider Push Back Chair Indiviual Arm Providing & placing high back slider push back auditorium chair with indiviual arm at Players sitting area. SEAT REST ASSEMBLY: The seat rest assembly is 1.5±0.1 cm thk. flat plywood measured as per QA method described in OCP-QLTA-P14-18 and in-situ moulded with polyurethane foam & upholstered with polyester fabric and enclosed by an injection moulded cover. The Seat has an auto-tip up feature making it stay in upright position when not in use enabling clear row passage. The seat profile has a large waterfall edge to help the users get necessary comfort in popliteal region. *SEAT SIZE: 45.0 cm. (W) x 50.5 cm (D) x 13.8 cm (T) Approx..In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by OEM/manufacturer. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification.BACKREST ASSEMBLY: The assembly is made up of 1.2±0.1cm thk flat plywood measured as per QA method described in OCP-QLTA-P14-18 upholstered with polyester fabric and enclosed by an injection moulded back cover. The back foam is designed with contoured back support for extra comfort.*HIGH BACK SIZE: 48.7 cm. (W) x 76.9 cm (H) x 12.5 cm (T) Appx.HIGH RESILIENCE PU FOAM: The HR PU foam for Seat Back is moulded with Density 45 +/- 2kgs/m³.LEG FRAME ASSEMBLY: The assembly is fabricated from M.S. tube 6.0±0.03cm x 4.0±0.03cm x 0.2±0.016cm thk welded with grouting member. It is black powder coated ( DFT 40-60 microns ) & grouted to the floor using anchors.ARMREST ASSEMBLY: The armrest is made up of black integral skin polyurethane with 65+/-10 Shore "A" hardness and reinforced with M.S. insert fixed with leg frame. The armrests are scratch and weather resistant ans it should be without cup holder.ARMREST CLADDING: The armrest cladding is made up of 0.9±0.1 cm thk Plywood & upholstered with polyster fabric. The cladding is fixed to Aisle Side panel Only. All in between panels will not have armrest cladding.POWDER COATING: All steel components are Epoxy Polyester Powder Coated ( DFT 40-60 microns ).The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level2 & min 10 years membership and Indoor Advantage Gold certification.FLOORING PRE-REQUISITE : The auditorium chair is designed to get grouted on RCC floor foundation. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 5 Canteen Table - 4 SeaterProviding and placing in position Canteen table of the following specifications. Pod with MDF top PU Coated size shall be800 Widthx 800 Depth mm x 745 Height mm . Top shall be of MDF 25 mm thick size : 800 mm x 800 mm x 25 mm. Options of many colours in PU coating on a sealer coat should be available. PU coating done on both top and bottom surfaces. PU coating has a hardness of 1H- 2H. Top is Fitted to the understructure with No. 8 x 16 plilip head screw. Understructure shall be foldable and stackable, made with combination of aluminium and plastic. Centre column is of Aluminium extrusion of diameter 70 mm, which is anodized. Base is made in 2 pieces of die cast aluminium with buffed finish. It is bolted together with centre column and top flange . The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level2 & min 10 years membership and Indoor Advantage Gold certification.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by OEM/manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 6 Canteen Chair - SS UnderstructureProviding and placing in position Canteen chair where the single piece seat back shell shall be made up of injection moulded high impact strength glass filled polypropylene polymer compound* SHELL SIZE: 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H). Product shall be GreenGuard (UL) certified. SS UNDERSTRUCTURE: The tubular welded frame shall be made from Dia 2.22 ± 0.03 cm x 0.15 ± 0.0128 cm Stainless Steel 304 grade tube which shall be buff polished. The 0.16 ± 0.008 cm thk Stainless Steel 304 CRCA sheet shall be welded to tubes for fixing shell to the frame. The shoe shall be made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level2 & min 10 years membership and Indoor Advantage Gold certification. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by OEM/manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 7 Changing Room : 2 Door Personal Locker UnitProviding and placing 2 door locker unit with overall size shall be 380mm(W)x450mm(D)x1830mm (H). Stackability shall have add-on units that can be stacked width wise to form bank of lockers having common side panel. Product shall be Greenguard, Green pro, Indoor advantage gold & GRIHA SVAGRIGA certified. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABSplastic handle . Ventilation shall be attractive punched pattern for ventilation. 1 Hanging rod in both compartment should be provided.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by OEM/manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 8 Changing Room Foldable Table - 4 SeaterProviding and placing in position multipupose table of the following specifications. The overall dimensions of the table shall be 1200 x 600 x 750mm. Table top shall be made from 25mm thick MDF OSR board with PU coating on top side. Product shall be GreenGuard (UL) certified. Legs are made by welding the combination of MS ERW round tube of dimater 63.5mm x 2mm thick. Flamges of 1.6mm thick CRCA and 1.2mm thick. Insde platew are made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top folds upside at offset center pivot provided on support bracket which is Aluminium alloy pressure die cast part coated with epoxy olyester powder caoted min. 40 microns. Table top connected with spring loaded mechanism with membranell handle made of sandwich tubes of MS ERW 1.2mm thick and 1.6mm thick tubes. Coated with epoxy polyester powder coated min. 40 microns. Legs are provided with casters of 65mm diameter loackable type for ease of movement and can be locked when required at any position.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level2 & min 10 years membership and Indoor Advantage Gold certification.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by OEM/manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 9 Changing Room - Chair with ArmProviding and placing multipurpose chair where the seat and back are made up of injection moulded high impact strength polypropylene polymer with indoor gate UV resistance. Product shall be Greenguard Gold, Green Pro, Indoor advantage gold, GRIHA & SVAGRIHA and BIFMA level 2 certified. The dimensions of Back shall be 51.6cm. (W) X 40.5cm. (H) and of seat shall be 52.5cm. (W) X 53.2cm. (D). The powder-coated (DFT 40-60 microns ) frame structure shall be made of 3.5±0.03cm x 1.5±0.03cm x 0.16±0.0128cm thk M.S. E.R.W.tube and welded connecting tube made of dia 2.22±0.03cm x 0.16±0.0128cm thk M.S. E.R.W. SQUARE tube to form the Mainframe assembly. The armrest are made of high impact strength polypropylene polymer compound with indoor grade UV resistance and assembled over tubular frame. The shoes are made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. The "L" shape desklet is madeup of 1.8+/-0.05cm thk pre laminated particle board with 0.2+/-0.05cm thk injectio moulded polypropylene all around. Desklet has front and back adjustment of 4.4cm +/-0.5 cm. The outer dimensions of desklet are 31.5+/-0.1cm (W) x 47.0+/-0.1 cm (D). The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level2 & min 10 years membership and Indoor Advantage Gold certification.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by OEM/manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 10 Staff Seating Area - Workstation 1200x600Providing and placing partition based modular workstation with System ht 1200 mm with partition thickness 52.4 mm thk as main spine including powder coated aluminium trims and 22.8mm thick Fin panels at the ends as per the layout. The product shall be Greenguard UL, Green Pro CII, Indoor Advantage Gold, GRIHA & Bifma level 2 certified. The certificate mentioned in the specification must be issued by an authorized issuer and must mention product name along with manufacturer name.Partition Construction - A block of 52.4mm thick panel comprises of 38mm thick paper honeycomb + 3mm MDF on each sides + .6mm decorative laminate or fabric on both sides. The panels are elevated from ground by 120mm with legs. Each panel consists of Vertical extrusions and Horizontal extrusions trims made of 1.2mm thick aluminium with duly powder coated at every division of tile/block. Particle board framing is used on outer boundary of the blocks as well as intermedicately at locations forming conduit for passing cables. Fabricated bottom frame comprises of L-channels made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm thick oval cross section (IS:7138) welded together. This frame is bolted to the uprights with M6 screw.Worksurface -Size 1200mm (W) x 600mm (D) shall be made out of 25 mm thk prelam particle board IS-12823 grade with flat pvc lipping edge banding.Tiles - Top tile shall have the combination of fabric tiles made of .6mm thick mdf panles wrapped with fabric. Bottom Tile shall be laminated one made of 8mm thick particle board confirming to IS 12823 having all its edges with minimum .5mm thick edge banding.Wire Management through main spine : Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Only provisioning of wires/switches etc shall be given. All the electrical wires/switches/data/accessories etc. shall not be part of furniture supply.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Metal drawer pedestal BoxFile and keyboard tray should be provided. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 11 Director Office - Executive Table with ERU & Back StorageProviding & placing desk main table with overall size of table 2350 x 2350 x 750mm. The product shall be Greenguard UL, Green Pro, GRIHA & Indoor Advantage Gold certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The Back Unit shall be of dimensions 1800 x 500 x 1800mm. It shall be made of 25mm thick MDF– one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm PVC membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer, as per the attached Performa. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 12 Director Office - Side Storage UnitProviding & placing back storage unit shall be of dimensions 1800 x 500 x 1100mm. It shall be made of 25mm thick MDF– one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The product shall be Greenguard UL, Green Pro, GRIHA & Indoor Advantage Gold certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm PVC membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 13 Director Office - Main High Back ChairProviding and Placing high Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The product shall be Greenguard UL, Green Pro, GRIHA & Indoor Advantage Gold & BIFMA Level2 certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level2 and Indoor Advantage Gold certified and min 10 years BIFMA membership. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 14 Director Office - Medium Back Revolving ChairProviding and Placing medium Back Chair with overall of 76.1cm x 76.1cm x (98.6-116.1cm) Height. The product shall be Greenguard UL, Green Pro, GRIHA & Indoor Advantage Gold & BIFMA Level2 certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. The overall dimensions of the chairThe seat height shall be 44.5cm-54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable uptp 6.5cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted fro 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia.. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level 2 and Indoor Advantage Gold certified and min 10 years BIFMA membership. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 15 Director Office - Visitor ChairProviding and Placing visitors Chair with overall size of the chair shall be 60.9cm x 64.3cm x 99.6cm. The product shall be Greenguard UL, Green Pro, GRIHA & Indoor Advantage Gold & BIFMA Level2 certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. The seat height shall be 44.8cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The tubular frame shall be powder coated DFT 40-60 microns and is cantilever type and made of 2.54cm X 0.2cm thick MS ERW tube. The back is connect to frame through powder coated high pressure die cast connector piece. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 16 Director Office - 3 Seater Sofa Leatherette UpholsteryProviding and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2042W x 901D x 847H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu. mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. Leg Assembly : It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 17 Director Office - 1 Seater Sofa Leatherette UpholsteryProviding and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 901D x 847H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu. mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. Leg Assembly : It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 18 Director Office - Centre Table Glass topProviding and Placing glass top centre table with overall size of table shall be 1000L x 650W x 450H mm. TABLE LEGS METERIALS & SIZE : L X W X T 70 X 70 mm with PU coating.TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm) L X W X T 1000x650x10mmTABLE BOTTOM MATERIALS & SIZE : (Tempered Glass 6 mm thk) L X W X T 755x195x6mm. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard, Green Pro & BIFMA membership min 10 years certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 19 Office Incharge and Umpire Room - Executive Table with ERUProviding and placing in position Main Desk with ERUof the following specifications. Main Deskwith ERU size shall be1650 Width x 700 Depth x 743 Height (Main Desk) 1000 WidthX 450DepthX 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard, Green Pro & BIFMA membership min 10 years certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 20 Office Incharge, Umpire & Staff Room - Main ChairProviding & placing revolving chair Greenguard Gold UL, Green Pro CII, Indoor Advantage Gold & Bifma Level 2 certified where cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44.2cm W x 51.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm). The certificate mentioned in the specification must be issued by an authorized certificate issuer. The certificate must mention product name along with manufacturer name. The certificate must be verifiable from the authorized issuer"s website. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer.Complete in all respect to the entire satisfaction of Engineer-in-Charge. 21 Office Incharge, Umpire Room - Visitor ChairProviding & placing visitor chair Greenguard Gold UL, Green Pro CII, Indoor Advantage Gold & Bifma Level 2 certified where cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44.2cm W x 51.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The overall dimensions of the chair shall be 48.50cmx 58.90cm x93.30cm. The seat height shall be 47.10cm. The certificate mentioned in the specification must be issued by an authorized certificate issuer. The certificate must mention product name along with manufacturer name. The certificate must be verifiable from the authorized issuer"s website. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 22 Office Incharge & Umpire Room - 3 Seater SofaProviding and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2042W x 901D x 847H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu. mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. Leg Assembly : It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer, as per the attached Performa. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 23 Office Incharge & Umpire Room - 2 Seater Black Leatherette UpholsteryProviding and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1452W x 901D x 847H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu. mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. Leg Assembly : It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 24 Office Incharge & Umpire Room - Centre Table Glass top with SS understructureProviding and placing glass top centre table where glass shall be 10+/-0.3mm thick black tinted toughened UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions oftable shall be Width of table= 111.0 cm, Depth=59.0 cm, height=34.1 cm. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Green Pro certified and must have inhouse manufacturing of all the products of said requirement i.e. furniture, mattresses, kitchen etc. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 25 VIP Sitting Area - 3 SeaterProviding and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2042W x 901D x 847H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu. mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. Leg Assembly : It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer, as per the attached Performa. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 26 VIP Sitting Area - 2 SeaterProviding and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1452W x 901D x 847H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu. mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. Leg Assembly : It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement.In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 27 VIP Sitting Area - Wooden Centre TableProviding and placing wooden center table with overall size : (Width) 119.9cm,(Depth) : 59.9cm and (Height) : 45cm. Primary Material of the table should be Plywood and rubberwood with Walnut finish.Maximum Load Capacity should be 50kg. Table top should be 24mm thick. The curved legs and posh color are reminiscent of the Vintage Era.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, BIFMA level2 and min 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 28 Entry Lounge- 3 SeaterProviding and placing 3 seater sofa with overall size of 175cm(w)*87cm(d)*78cm(h)*43cm(sh).Stiching thread should be Polyproplin. Upholstery should be in PVC .9mm Thick (mm) and weight (GSM) : 575. FRAME MATERIAL (TROPICAL WOOD): Moisture Content ( 10 – 12 %) : 16-20%. Thickness of Plywood used(mm) : 12mm & 18mm. SEAT FOAM: (DENSITY, TYPE)-Thickness (mm) : 69, 22 & 10 mm. Density (Kg/m3)- 32d. Type of Foam : Vergin Always / in some case Moulded - Density :- 48d. LEG MATERIAL: * Fixing of Leg : Woodscrew provided on frame in addition to M-8 / T-Nut * Material of leg should be Plastic and PVC Bush for Leg bottom. BACK FOAM: (DENSITY, TYPE) -Thickness (mm) : 45 mm. Density (Kg/m3): 28 d. ARMREST FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm .Density (Kg/m3): 26 d.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Green Pro certified and must have inhouse manufacturing of all the products of said requirement. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 29 Entry Lounge- 2 SeaterProviding and placing 2 seater sofa with overall size of 134cm(w)*87cm(d)*78cm(h)*43cm(sh).Stiching thread should be Polyproplin. Upholstery should be in PVC .9mm Thick (mm) and weight (GSM) : 575. FRAME MATERIAL (TROPICAL WOOD): Moisture Content ( 10 – 12 %) : 16-20%. Thickness of Plywood used(mm) : 12mm & 18mm. SEAT FOAM: (DENSITY, TYPE)-Thickness (mm) : 69, 22 & 10 mm. Density (Kg/m3)- 32d. Type of Foam : Vergin Always / in some case Moulded - Density :- 48d. LEG MATERIAL: * Fixing of Leg : Woodscrew provided on frame in addition to M-8 / T-Nut * Material of leg should be Plastic and PVC Bush for Leg bottom. BACK FOAM: (DENSITY, TYPE) -Thickness (mm) : 45 mm. Density (Kg/m3): 28 d. ARMREST FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm .Density (Kg/m3): 26 d.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 30 Entry Lounge - 1 SeaterProviding and placing 1 seater sofa with overall size of 92cm(w)*87cm(d)*78cm(h)*43cm(sh).Stiching thread should be Polyproplin. Upholstery should be in PVC .9mm Thick (mm) and weight (GSM) : 575. FRAME MATERIAL (TROPICAL WOOD): Moisture Content ( 10 – 12 %) : 16-20%. Thickness of Plywood used(mm) : 12mm & 18mm. SEAT FOAM: (DENSITY, TYPE)-Thickness (mm) : 69, 22 & 10 mm. Density (Kg/m3)- 32d. Type of Foam : Vergin Always / in some case Moulded - Density :- 48d. LEG MATERIAL: * Fixing of Leg : Woodscrew provided on frame in addition to M-8 / T-Nut * Material of leg should be Plastic and PVC Bush for Leg bottom. BACK FOAM: (DENSITY, TYPE) -Thickness (mm) : 45 mm. Density (Kg/m3): 28 d. ARMREST FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm .Density (Kg/m3): 26 d.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 31 Entry Lounge - Centre Table Glass top with SS understructureProviding and placing glass top centre table where glass shall be 10+/-0.3mm thick black tinted toughened UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions oftable shall be Width of table= 111.0 cm, Depth=59.0 cm, height=34.1 cm. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold, GreenPro certification and BIFMA 10 years membership certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 32 Entry Lounge - Corner Table Glass top with SS understructureProviding and placing glass top centre table where glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.Overall dimensions oftable shall be Width of table= 59.0 cm, Depth=59.0 cm, height=34.1 cm. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Green Pro certified and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 33 Store Room - Double Sided RackProviding and placing in position Double Body Book Rack. Overall size of bookrack shall be* Single Body 1200W x 600D x 2078H mm. Body : A. Side panels, Frame & Cross L bracket shall be made using 0.8 mm CRCA (IS:513). B. The assembly shall consists of 2 tie rods, 4 fixing bracket sand 2 turnbuckles in each body. The tie rods shall be fixed in a shape of ‘X’ The tie rods shall be made of 4mm diameter rods of MS while fixing brackets shall made of 2mm thick. CRCA IS:513 Grade. C.C. Provision of optional extra wooden panel shall be of 25mm thk PLT, E1-P2 grade board for PLT to be added on both sides if required on additional extra cost. Edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Understructure : A. It shall be made of 0.8m CRCA (IS:513). B. Sizes of under structure for Double body : 1200W x 595D x 80H. Shelves : A. Shelves used shall be 10 bend panel made of 0.8mm CRCA (IS:513). B. Shelf panels shall be placed on shelf support and then fixed using nutand bolts from below. C. It shall consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. D. Uniformly Distributed Load Capacity shall be per each shelf is 80 Kg maximum. Construction shall be Completely Knock down. All MS sheet metal and metal frame components shall be powder coated with epoxy polyester powder to the min thickness of min 45microns. Stackability : The add-on units shall be be stacked width wise to form a bank of racks. Shelves back stiffener: At the rear side of the shelves back stiffeners shall be provided. These shall be act as separators made of 0.8mm THK CRCA (IS:513). Label Holder: It shall be an aluminum extrusion of length 296mm for single body bookrack, fitted on to front of body. The Paper shall be 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper shall be 296mm. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard, Green Pro & BIFMA membership min 10 years certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 34 Store Room - Single Sided RackProviding and placing in position Single Body Book Rack. Overall size of bookrack shall be *Single body 1200Wx300Dx2078H mm.Body : A. Side panels, Frame & Cross L bracket shall be made using 0.8 mm CRCA (IS:513). B. The assembly shall consists of 2 tie rods, 4 fixing bracketsand 2 turnbuckles. The tie rods shall be fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets shall be made of 2mm thick. CRCA IS:513 Grade. C. Provision of optional extra wooden panel shall be of 25mm thk PLT, E1-P2 grade board for PLT to be added on both sides if required on additional extra cost. Edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue Under-structure : It shall be made of 0.8m CRCA (IS:513). B. Sizes of under structure for single body : 1200W X 295D X 80H. Shelves used shall be 10 bend panel made of 0.8mm CRCA (IS:513). B. Shelf panels shall be placed on shelf support and then fixed using nutand bolts from below. C. It shall consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. D. Uniformly Distributed Load Capacity per each shelf shall be 80 Kg maximum. Construction shall be completely Knock down. All MS sheet metal and metal frame components shall be powder coated with epoxy polyester powder to the min thickness of min 45 microns. Stackability : The add-on units shall be be stacked width wise to form a bank of racks. Shelves back stiffener : At the rear side of the shelves back stiffeners shall be provided. These shall be act as separators made of 0.8mm THK CRCA (IS:513). Label Holder: It shall be an aluminum extrusion of length 296mm for single body bookrack, fitted on to front of body. The Paper shall be 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper shall be 296mm.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard Gold and BIFMA membership min 10 years certification and must have inhouse manufacturing of all the products of said requirement. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 35 Store Room - Glass Door StorwelProviding and placing Storwel with glass doors which shall have an overall size of916mm(W)x486mm(D) x 1980mm(H) with welded construction. The product shall be Greenguard UL, Green Pro, GRIHA & SVAGRIHA, Indoor Advantage Gold certification. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 36 VIP Audience Area - Recliner 3 SeaterProviding and Placing in position reclinerr with following specifications. Overall Size of 3 Seater should be : Width: 197cm Depth : 74cm Height : 100cm Seating Height : 44cm Stitching: thread : nylon 40 tktpitch: gap 2 mm from border + pitch 6 per inch full pu leatherette.Frame material should be made of rubberwood. Moisture content should be in the range of 12 – 14 %, Seat foam with 24 density foam + pocket spring (49 nos. of dia 50 mm / seat) spring rod dia =1.6 mm+ 24 density foam. Back foam: (density, type) :24 density foam + polyester fabric (recron). Armrest foam: (density, type) :24 density foam. Smooth reclining mechanism for noiseless and effortless reclining at any angle.• Store your favourite book or magazine in a convenienteasy-to-reach side pocket for comfy reading.• Synthetic leather upholstered, this durable exterior has a superior smooth finish with symmetrical stitching lines for enhanced aesthetics.• A soft foam seat and conjugated fibre filler in both arms and backrest provide a relaxed cushioned feeling.• Comes with an integrated coffee table and backrest.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level 2, Indoor Advantage Gold certified & BIFMA membership for minimum 12 years. In case of Contractor or Authorized Dealer, Completion certificates of execution of similar works by OEM/manufacturers (as per approved list) and other credentials are also valid for similar work experience provided a consent letter is given along with OEM authorization certificate. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 37 VIP Audience Area - Recliner 1 SeaterProviding and Placing in position reclinerr with following specifications. Overall Size of 1 Seatershould be Width: 83cm Depth : 74cm Height : 100cm Seating Height : 44cmStitching: thread : nylon 40 tktpitch: gap 2 mm from border + pitch 6 per inch full pu leatherette.Frame material should be made of rubberwood. Moisture content should be in the range of 12 – 14 %, Seat foam with 24 density foam + pocket spring (49 nos. of dia 50 mm / seat) spring rod dia =1.6 mm+ 24 density foam. Back foam: (density, type) :24 density foam + polyester fabric (recron). Armrest foam: (density, type) :24 density foam. Smooth reclining mechanism for noiseless and effortless reclining at any angle.• Store your favourite book or magazine in a convenienteasy-to-reach side pocket for comfy reading.• Synthetic leather upholstered, this durable exterior has a superior smooth finish with symmetrical stitching lines for enhanced aesthetics.• A soft foam seat and conjugated fibre filler in both arms and backrest provide a relaxed cushioned feeling.• Comes with an integrated coffee table and backrest.The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level 2, Indoor Advantage Gold certified & BIFMA membership for minimum 12 years. In case of Contractor or Authorized Dealer, Completion certificates of execution of similar works by OEM/manufacturers (as per approved list) and other credentials are also valid for similar work experience provided a consent letter is given along with OEM authorization certificate. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 38 Media Hall Table - 4 SeaterProviding and Placing in position table for discussion with overall size of 2100 W mm x 1150 D mm x 740 H mm. The product shall be Greenguard UL, Green Pro, Indoor Advantage Gold and GRIHA & SVAGRIHA certified. The certificate mentioned in the specification must be issued by an authorized certificate issuer and must mention product name along with manufacturer name. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Top shall be made of 25 mm thick Pre-laminated twin board, edge banded with matching PVC edge lipping. Access panel shall be provided with soft closing hinges. The understructure shall consist of 25 mm thick * 18 mm thick pre-laminated twin board, edge banded with 2 mm thick matching lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. A wire raiser made of 0.8 mm thick CRCA shall be provided. It shall be epoxy polyster powder coatedc(DFT 40-60 microns) for flow of wires and cables. The Bidder/OEM shall be ISO 9001, ISO 14001, ISO 45001, Greenguard UL, BIFMA level 2, Indoor Advantage Gold certified & BIFMA membership for minimum 12 years. In case of Contractor or Authorized Dealer, Completion certificates of execution of similar works by OEM/manufacturers (as per approved list) and other credentials are also valid for similar work experience provided a consent letter is given along with OEM authorization certificate. Complete in all respect to the entire satisfaction of Engineer-in-Charge. 39 Media Hall - Revolving ChairProviding & placing revolving chair Greenguard Gold UL, Green Pro CII, Indoor Advantage Gold & Bifma Level 2 certified where cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 44.2cm W x 51.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm). The certificate mentioned in the specification must be issued by an authorized certificate issuer. The certificate must mention product name along with manufacturer name. The certificate must be verifiable from the authorized issuer"s website. OEM/Bidder should have completion of all mentioned products. In case of Authorized Dealer, Completion certificates of execution of similar works by manufacturers & other credentials are also valid for similar work experience provided a consent letter is given by furniture manufacturer. Complete in all respect to the entire satisfaction of Engineer-in-Charge.

Contact Information

Other Detail