|
Submersible Pump For Artesian Wells Nominal Power Of (3/4 Hp) Or Higher, Designed To Boost Clean Water, Capable Of Operating At A Total Manometric Head Of 45 Mca, Guaranteeing A Minimum Flow Of 2.4 To 3.4 M³/H At This Operating Point, According To The Manufacturers Characteristic Curve; Equipped With 1 Bsp Discharge Nozzle, Compatible With Pressure System In Dn 25 Pvc Piping, Built With Materials Suitable For The Application (Stainless Steel Body, Rotor In Anticorrosive Material, Stainless Steel Shaft And Mechanical Seal), Induction Electric Motor, 60 Hz, With Minimum Degree Of Protection Ip68 And Insulation Class F, Must Present Compatible Hydraulic Curve That Fully Meets The Required Performance Conditions, Three-Phase Electricity Input Standard, With Reinforced Concrete (Cement) Post With A Height Of 7 Meters, Intended For Electricity Connection, Compatible With Utility And Abnt Standards, Water Tank With A Minimum Capacity Of 2,000 Liter, Made Of High Density Polyethylene (Hdpe) Or Equivalent Material, With Sealed Cover, Weather Resistant And With Protection Against Uv Rays, Suitable For Storing Drinking Water, Electrical Cable With Nominal Section Of 25 Mm², Copper Conductor, With Pvc Insulation Or Equivalent Material, Suitable For Low Voltage Electrical Installations, With Good Resistance And Durability, Meeting Technical Standards Current., Pp Cable 2X1 4Mm, Flexible, With Copper Conductors, Pvc Insulation Or Equivalent Material, Suitable For Connecting Electrical Equipment, 04/14/2026 - 12:43:23, 04/14/2026 - 12:43:27, Pvc Electrical Passage Box, With Dimensions Of 25 25 Cm, With Cover, Intended For The Protection And Organization Of Electrical Connections, Weather Resistant And Suitable For Electrical Installations., Corrugated Hdpe Conduit (High Density Polyethylene), With A Nominal Diameter Of 1 ½ Inches, Intended For The Protection Of Electrical Cables, Resistant To Impacts, Humidity And Weather, Suitable For Installations Underground Or Exposed, Connection Sleeve For Pipes, With A Diameter Of 1 Inch, Made Of Pvc Or Equivalent Material, Intended For Joining Pipes, Resistant To Pressure And Corrosion, Suitable For Hydraulic Systems., Nipple With A Diameter Of 1 Inch, Made Of Resistant Material (Galvanized Metal Or Reinforced Pvc), Intended For Connecting Pipes, Ensuring Adequate Sealing And Fixing In Hydraulic Systems, Ptfe (Teflon) Thread Sealing Tape, Suitable For Sealing Threaded Connections, Guaranteeing Watertightness In Hydraulic Systems, Resistant To Pressure And Humidity., Copper Ground Rod, With A Length Of 1.20 Meters, Intended For The Protection Of The Electrical System, Providing Dissipation Of Leakage Currents And Electrical Surges, Made Of Resistant Material And In Accordance With Current Technical Standards., Reinforced Flexible Hose, Made Of Pvc Reinforced With Polyester Weave Or Equivalent Material, Suitable For Conveying Water Under Pressure, Resistant To Abrasion, Weather And Continuous Use., Rigid Pvc Tube, With A Nominal Diameter Of 25 Mm, Minimum Pressure Class Pn 10 Or Higher, Intended For Conducting Water In Hydraulic Systems, And Must Be Manufactured In Accordance With Abnt Standards (Nbr 5648 Or Equivalent), Have A Smooth Internal Surface That Favors Flow, Resistance To Pressure, Impacts And Weather, In Addition To Compatibility With Connections Of The Same Diameter. The Product Must Be New, First Use, And Have A Warranty
|
